Date | Header | Text |
28-04-2009 | Post subject: Re: Outputs Transistors keep blowing - NAD 722 | Thanks vtech, I had heard of this once before but it was not explained to me in the concise way as you have just done. I was told though that if you slowly increase the level on the Variac and the current more or less follows it linearly, then the amp is |
28-04-2009 | Re: Post subject: Re: Outputs Transistors keep blowing - NAD | [quote:2be425c186="Bunyip"]Thanks vtech, I had heard of this once before but it was not explained to me in the concise way as you have just done. I was told though that if you slowly increase the level on the Variac and the current more or less follows it |
28-04-2009 | | [url]http://www.renex.info/pokaz_produkt.php?id=106[/url] |
28-04-2009 | | [url]http://www.renex.info/pokaz_produkt.php?id=106[/url] |
28-04-2009 | | [url]http://www.renex.info/pokaz_produkt.php?id=106[/url] |
28-04-2009 | 20GX3555/71R | Anubis s-aa chassis. |
28-04-2009 | | Replace the thermistor. RCA 207768 works. |
29-04-2009 | | there no channel at all, and the audio is ok, only the display and no channel |
29-04-2009 | | i dont know, what the chassis number, i know only the model pls help me |
29-04-2009 | | If you punch in "WXYZ" and get the audio from "WXYZ," but just a blue screen with or without an On Screen Display (OSD) acknowledgement of "WXYZ," either the video is being "muted" or you're losing the video somewhe |
29-04-2009 | Toner Exhausted SCX 4300 SAMSUNG | Hi,
I have two samsung printers SCX 4300 and SCX 4200
SCX 4300 gives ERROR TONER EXHAUSTED and the SCX 4200 give ERROR TONER EMPTY, How can i reset the page counter of these printer and also need tp know How can i ENTER in the TECH MODE of both p |
29-04-2009 | | virus1000 you are right whole site [url]www.renex.info[/url] is very good :) |
29-04-2009 | | [quote:5cfcfe16ba="Rhodel"]i dont know, what the chassis number, i know only the model pls help me[/quote:5cfcfe16ba]
This is the chassis no. Anubis s-aa [b:5cfcfe16ba][u:5cfcfe16ba][/u:5cfcfe16ba][/b:5cfcfe16ba] |
29-04-2009 | | As you should know from the other boards you are on, the problem isn't with the printer but with the chip on the toner cartridges. You have to reset the chips or replace them. Once the chips blow, they are history unless you reset them which isn't always |
29-04-2009 | | I've got the schematic for this. Got something to trade?
[email protected] |