Date | Header | Text |
22-09-2008 | | The post is almost 2 years old. |
22-09-2008 | | No I did not but it is the exact same issue when I started this adventure
the problem progressivley got worst until it shut down totally :cry: |
23-09-2008 | White Superlock 534 serger instruction manual | I would really appreciate it if someone has a copy of this manual that they could photocopy for me. I inherited the machine from my grandma when she died and there was no instruction manual with it.
Many thanks in advance. |
23-09-2008 | klipsch Promedia 5.1 schematics | I have read all the forums on Klipsch and other related sites. I found quite a few burnt components. Particularly R527, the two diodes next to it.
R529 and the resistor next to it. Does anyone know where I can find schematics or has anyone drawn any u |
23-09-2008 | | yes I can. u ment by going to menu 0-3-7-0 entr right? & check fluid on DM boards where I solder the caps? "fluid" means the flux I used??? do I need to remove caps & resolder it back in?
thanks again in advanced
zee |
23-09-2008 | | Here's the status! I just got done talking to my friend and, says TV works all night lastnight then, this morning when they turn ON the TV same thing again! no signal w/ blue screen. but this time it will turn ON once they reset the TV ( reset button infr |
23-09-2008 | Re: Blinking green light of death | [quote:09f2614160="zee"]Hello, I hope someone here will able to help me out. Im having problem w/ Mitsu WS-73713. after replacing the 4 caps to 1000uf 35v TV turns on but, doesn't get signal from cable box nor, DVD player. but, it shows the setup menu ie: |
23-09-2008 | wukfhk | Contact Paul at [email protected]. He can get you the schematic. |
23-09-2008 | I need service manual for Philips 21PT1321/75T (AUS Model) | I had a single vertical lines issue with this baby. Thought I first would be a defective vertical deflection IC TDA3653B, replaced it with new one, but it didn't seem to fix it. Help, please. Thanks.
email [email protected]. |
23-09-2008 | | [quote:1c07ba0a39="Anonymous"]Hi Mozster,
I have a Hinari Lifestlye Microwave and also MANUAL!!!!!!
Let me tell you how to set the clock!
First, you press the clock button
Press the cancel button, the display will show 0
Enter the current time |
23-09-2008 | | Heey
I managed to find the part numbers after a long search.
Thanks, and for the ones who might ever need it.
LCD Back cover : P000487930
LCD Mask Assambly : P000487940 (includes the covers for the hinges )
Thansk again bye
Ken Kee Chung |
23-09-2008 | Klipsch | I contacted him and he doesn't have any klipsch schematics. Does anyone know of anyone else who might have schematics? |
23-09-2008 | | Usually, it is difficult to identify small hole mounted diodes with a such simple marking code.
But you can be pretty sure that it is either a silicon switching diode like 1N4148, or a schottky diode, or a 0,5 W zener diode.
A good way of identifying |
23-09-2008 | | thanks minnie. i'll check the board again tomorrow and see if one of the caps polarity are reversed. also, what do you mean by "check the fluid" on the signal board??? & why TV works after resetting it?
thanks for all your generous help! |