|17-10-2009||Faulty here too||timllfixit, Tim i have one of these monitors and am trying to repair it. Is it possible to tell me where to look for this fault? It does as you have mentioned. Nothing happens when try to power on. It worked fine for 18 months then one day died. I see you|
|17-10-2009||10 model number matches found just by using the "search" button above. :roll:
By far the largest:
|17-10-2009||[quote:1604229449="minnie"]I don't have an index out side of US models.[/quote:1604229449]
My hope was that this is a common failure, whether the model is US, European, Japanese or whichever.
The fix should be applicable even to different model of the T|
|17-10-2009||Need help with Samsung syncmaster 400Pnx||Hi good folks!
Got myself a samsung syncmaster 400PXn Lcd monitor but it refuses to start.... When i plug it in, and turn the power on it still is black and it sort of clicks every 2-3 sec. It sucks.
dont know if its fixeble but would love to try.
|17-10-2009||If you read my first post, that's exactly what I wrote about bad/cold solder (except for excess heating).
Cold solder causes intermittent changes in voltage or current. It increases resistance, so it generates additional voltage drop - everything clear s|
|17-10-2009||ftv2701a||did you ever find a manual? if so, i would like to trade you something comparable for at least the audio portion of the schematic. my 2701a doesn't have any sound.
|17-10-2009||when i turn the power on at the plug it clicks the green power light on and off on its own without powering up. better desciption|
|17-10-2009||Can't edit own posts, so have to make another...
Spell error in the above post: [i:e47294f300]colder = solder[/i:e47294f300], of course.
Wanted to add that above-and-below nominal value jumps of the red signal level make me crazy, as I can't disting|
|17-10-2009||22DC277/62 PLEASE HELP!!!!!||Hello,
can anybody help me to find a code for my radio
I need code to Philips radio in Renault Megane
Prod No FD0103220196240
|17-10-2009||Here is the service manual:
[URL=http://www.filehost.ro/586098/3900z_4900z_5900z_pdf/]3900z 4900z 5900z pdf[/URL]|
|17-10-2009||Perhaps instead of keep repeating yourself, if you spend a little time to read about basic ohms law or how an RGB circuit suppose to work, you may have a better understanding.
ONE MORE TIME;
For a signal to get from point A to B, it must have a solid |
|18-10-2009||Probably too late but I have a work-around, Toshiba SD-2800||You may already have given up on this model and bought a new one, however, I have (sort of) a solution to this problem. I have a Toshiba SD-2800 that, over the years, has had limited use and today, when I tried to use it, I received constant "Disk Er|
|18-10-2009||Re: Probably too late but I have a work-around, Toshiba SD-2||[quote:030f28a779="sk8881"]You may already have given up on this model and bought a new one, however, I have (sort of) a solution to this problem. I have a Toshiba SD-2800 that, over the years, has had limited use and today, when I tried to use it, I rece|