| Date | Header | Text |
|---|
| 20-12-2011 | Guys I need some guidance | if a delicate cable as the one connecting monitor with cpu is cut can it be fixed? and if yes how? |
| 20-12-2011 | | In order for any wire(conductor) to conduct, it must have a solid contact. Glue is not a conductor and will not work. |
| 20-12-2011 | | Monitor to the cpu! there is no such wire?
If you meant the cable that goes from video card to the monitor, technically yes; it can be spliced (not glued) together but it can be too much of a hassle. Monitor cables are not very expensive in US market.
- |
| 20-12-2011 | | hey Guys. I Had The same Issue , But all Is Solved Now. Kinda Late For This Post , but anyways.
For Guys With Screen Cutting Off after Like 3 Seconds and So On. Check The Circuit Board For Cold Solder and Apply Fresh Solder as This Is a Kinda Old Monit |
| 21-12-2011 | | Excellant advice from Mr unknown, got my machine working again thanks. |
| 21-12-2011 | crown lcd26fhd ,question | hello to all,i have a problem with crown lcd26fhd tv.
i`am from serbia and i need a usb update for " u player " on this tv.
i need serbian font ,and large title fonts if it`s possible.
Thanks. |
| 21-12-2011 | | I have this TV, but a strange problem, that the tv channels are mixed up, for example bbc1 is channel 4 on the tv.
how do i set the channels in the correct order ?
[email protected] |
| 21-12-2011 | Peekton 19LC179 TV | I have a peekton 19LC179 TV just over one year old. The sound stopped, followed by the picture fading away. Now just the blue light below the screen continues to flash. Any ideas?
Thanks |
| 22-12-2011 | tonantich | I am looking for a KeyCode Ford 3000 traffic radio chanel 2 with serial number M119212 |
| 22-12-2011 | STARMEN POWER SUPPLY (TOM202CABB) | could someone please send me a schematic diagram or part number of transistor (Q6) because it is blown ..
thanks and advance..
sky.. |
| 22-12-2011 | | you didn't mention the source of your video and audio, if it is video player or from you tv tuner. if the problem that you mention is observed while watching a tv program, then try to feed video signal from you video player. if picture fading is resolve, |
| 22-12-2011 | | Hi
No luck with connecting a DVD player.
The flashing blue light is probably an indication of where the problem lies, however, I've been unable to track down a trouble shooting guide for a Peekton. |
| 22-12-2011 | | That's a shame. And such a well known brand. :lol: |
| 23-12-2011 | | Hi Guy's, I replaced Q7 (which didn't show any signs of any damage), but after leaving the tv on for several hours I have the same problem as fidget where a tiny blue/green line goes part way down the screen.
I find it strange that this never happened |
| 23-12-2011 | Power supply | So, the set is powering up ok now? Then the power supply is fixed.
The line on the screen is a new problem. |
| 23-12-2011 | Recruiting Repair Techs and Hobbyists for LCD Repairs | Hello All,
I am recruiting qualified technicians for parts replacement and repair for flat panel televisions.
This is a great way to pick up extra cash doing easy parts swaps. Work as little or as much as you like.
Typical service call involve |
| 23-12-2011 | | Sounds like the panel this is all I pull up Contact Sanyo Manufacturing Corp At 1-800-877-5032 |
| 23-12-2011 | Help me with TV ILO model DTV2784 | I need settings for service mode (Items value)
Thanks!!![color=black:652f8dfbb1][/color:652f8dfbb1][size=18:652f8dfbb1][/size:652f8dfbb1] |
| 23-12-2011 | | Yes Mate, The power is all sorted now (it works perfect).
The green line was never on the screen before and suddenly it appeared after the TV had been on for a few hours.
Many thanks (& sorry for not being logged in on my last post)
ASH |