|01-04-2007||you can only use original lamp.easy to install.lamp will probably be blown or shattered.|
|01-04-2007||not for sure but looks like might be bad yoke.|
Yes the lamp it shattered.
Hopeing to find a place local that has it.
I read on other post where people got into SERVICE on thier TV's.
To see how many hr's it had on it.
How do you do that?
|01-04-2007||i cant recall off hand,but dont mess with service mode if you do dont need to.it will be on some forum though.this set is a few years old,so i forget.|
Thanks for the help|
|01-04-2007||Searching for schematics: SONY TA-E 1000 ESD preamp||The title line tells it all - to be more specific: the device looses it's memory when removed for the main power... should be buffered for some days.
Thanks in advance!|
|01-04-2007||please help to open DJVU file||Please anybody help me to open the DJVU file. I've download the schematic but i cant open this file. i dont have this kind of aplication, can somebody knows please help. thanks!|
|01-04-2007||Need a security code for a Becker CR220 radio||Please help. I recently bought the car used and don't have the code.
Type: CR 220
Model: BE 4362
|01-04-2007||This will help DjVu Browser Plug-in
|01-04-2007||Memory is backed up by means of backup capacitor. Due to age, they will dry out or leak out. In the case of TAE1000, the culprit is capacitor C1011 located on digital pcb. (rated at .1F @ 5.5V)|
|01-04-2007||You have to make sure your getting your voltage to the IC. Don't forget about the pump up caps. They could be dry.|
|02-04-2007||thanks||thanks brod for the reply, it helps me a lot. God bless...|
|02-04-2007||I'm not need cr-315 but cr-515 service manual.|
I've got a service manual for Sony model TA-E1000ESD.
It is of high quality, with detailed schemes.
Format: Acrobat PDF.
Size File: 6.122 Mb
You can purchase it online on http://eshop-manuals.com/product_info.php/products|
|02-04-2007||Ford 4000 RDS code I need code||Hi, can anyone help me please to find my FORD 4000 RDS radio key code using those informations:
Serial number: M014093|
|02-04-2007||Re: Matsui 1414R TV||[quote:5c6c0300bd="Flic"]Hey,
Recently been given this TV by my sister, who has unfortuanely lost the manual. I would just like to know how to programme the channels.
Can anyone help me?[/quote:5c6c0300bd]
Did you have any luck with this? I've also |
|02-04-2007||sony kv-fs120 be-6 chassis||horizontal convergence is off. will not adjust with the stat control. swapped out crt board with no difference. seems to be an electronic problem as it is off equally all the way up and down. the vertical convegence is fine.|
|02-04-2007||re||Have you checked that you have supply voltage at pin 6 (+16,5v)?
Pin 3 is supply voltage for output stage.
Pin 1 is ground. I think this one is -16,5v. Not sure but i think so.
|02-04-2007||Re: thank for your good info!||[quote:76fc41076c="Heliax"]why I saw this warning when I try to connected :
[b:76fc41076c]Failed to resolve the name of server www-protech2u.com to connect [/b:76fc41076c][/quote:76fc41076c]
the link is:
|02-04-2007||RD-XS54SU||Please service manual|
|02-04-2007||Found and Uploaded for you, it can be found with the follwing link
|02-04-2007||Dvd recorder mishap||My JVc dvd recorder Hardly used and now not working at all since it went bang after i plugged the scart into the back of the telly. Anybody know if its likly to be dead good and proper. Bugger cost me £250. Bought a Humax now|
|02-04-2007||Need a Motorola Chip||Can anyone tell me where I can find a MC75452P driver chip? Looks like it is not a current production chip. There are many to be had from the internet suppliers but I also need to buy a hundred of the to get just one. The Digikeys and Mousers don't lis|
|02-04-2007||Didn't you read my post you moron?|
|02-04-2007||Great working link for hard to find manual||Thanks so much for the link. I have been looking everywhere for this manual and it will no doubt save me a lot of time and trouble in fixing my laptop!!!|
Have anything close to the HT-R500?
Can someone upload @ eserviceinfo dot com?|
|02-04-2007||515_315||Same manual, as in the link I posted, moij...i think it is also in the home page eserviceinfo dot com...I'll get it for you.|
|02-04-2007||Are you an electronic tech? if so give more detailed info. on what you've tested so far.If not give a simple description of your problem if possivle send a pic,but don't talk tech. stuff.|
|02-04-2007||this model has a big problem when first turned on with horizontal frequecy going off.if this is what you mean you could replace m board,or if you can replace ic on m board(jungle).|
|03-04-2007||I believe that's an obsolete Dual Nand driver. Remember the base numbering would be 75452P. (MC) was the Motorola version. Make sure to check packaging,
Sould be able to sub. Mouser shows stock on NTE & TI
|03-04-2007||doesn't anyone have a copy ?|
|03-04-2007||[quote:9daafa632a="PGelsman"]Didn't you read my post you moron?[/quote:9daafa632a]
And You think I will pay for CR-315 if i need CR-515 manual???? :idea: :?:|