Date | Header | Text |
24-03-2012 | need service manual for tv harwa ps-42d8s | need service manual for tv harwa ps-42d8s,thanks |
25-03-2012 | | You can get the Harwa PS-42D8S service manual at www.schematics.me |
25-03-2012 | service manual | I need a service manual for phillips lcd tv model 52pfl7403d/27 |
25-03-2012 | RCA F27242GY | Need to identify a part that I need for this TV:
RCA Model F27242Gy
Chassis No. CTC185AB
Service No. F27242GYTX1
The stub where the cable for cable TV hooks in broke off inside the TV. I have had it apart and I do know it is easy to replace b |
25-03-2012 | | RF connector for tuner.
Reattach the original "stub" to the tuner being very careful about your soldering techniques (remnant is probably still attached to the "cable" wire that was connected to the set when it was "broke off&q |
26-03-2012 | Re: YAMAHA DSP - A1 / AX1/ A2 | [quote:2eb3e0f73e="gregk74"]Displey problems. digits missing....sometime on / off
i can fix . let me know. only in birmingham .[/quote:2eb3e0f73e]
I have a problem , with my rx-v 3900 display messes up and it locks ,only vol. is working , can't chan |
26-03-2012 | Re: YAMAHA DSP - A1 / AX1/ A2 | [quote:a9fa3e2431="Anonymous"][quote:a9fa3e2431="gregk74"]Displey problems. digits missing....sometime on / off
i can fix . let me know. only in birmingham .[/quote:a9fa3e2431]
I have a problem , with my rx-v 3900 display messes up and it locks ,onl |
26-03-2012 | Olevia Syntax LT32HVM LCD Multi-media display...No Display | Hello Everyone,
I would like to ask help if anyone in this forum has a service manual or eeprom dump for Olevia Syntax LT32HVM LCD Multi-media display...The problem is - the unit turns on but there is no display (OSD/ Raster/ Audio) only the backl |
26-03-2012 | | Its a simple step you need to follow:
Go to start button and with the right click go to explore and select and click the drive letter and right click on the folder that you want to hide and click properties and check "read only" and apply. |
26-03-2012 | NAD 7240 Amplifier Idle current adjustment question/clarific | Hello all,
I'm currently working on the finishing touches to an NAD 7240 PE receiver and during the "Main Amplifier Alignment" procedures
I've run into a problem during the "Idle current adjustment" procedure as described in the ser |
26-03-2012 | | Hi,
[quote:80e008e898]... our EPROM programmer (old ISA "Sunshine") ... [/quote:80e008e898]
I also have an old eprom programmer of the same brand as yours (Sunshine, bus ISA ! ).
[quote:80e008e898]There is a CR2032 and a 3,6V 60-80mAh NI-CD? |
26-03-2012 | RE: Service Manual for a Virtual Reality Labs VR3 200W amp | Hello
I was given a 200W car audio amplifier with only 1 channel out of 2 working and was wondering if anyone might have or know of a source to either download directly or pay for a copy of the service manual. The details follow:
[b:e96c8e3e3f]Man |
27-03-2012 | | Schematic shows a jumper across resistors. To find out for sure, remove one resistor and check resistance reading at the solder "pads" with a DVM. A zero reading means there IS a jumper still there whether you see it or not. |
27-03-2012 | | Can help with last item:
[url]http://elektrotanya.com/onkyo_tx-nr708-b-s_rev-1_sm.pdf/download.html[/url] |
27-03-2012 | | This Parts & Service Manual can now be purchased for $11.77 and downloaded immediately after payment from
http://www.justmanuals.com
[email protected] |
27-03-2012 | | Guess you didn't read far enough, Paul?
[quote:5567ea6e01="AAVAudio"]I have the service manual with schematics and block diagrams for anyone that'd like them.[/quote:5567ea6e01] |
27-03-2012 | Canon 9000F Scanner | I am looking for service information or schematics for the 9000F scanner or the AC adapter used in this scanner (QK1-6242). I would like to find out what the voltage outputs of the 3 pin output connector should be. Any info would be appreciated. |
27-03-2012 | | Oopsie. |