Date | Header | Text |
25-08-2005 | | I went to icgrid, what am I looking for? |
25-08-2005 | | Check the solder on the vert. ic, otherwise marks right. Bad crt. |
25-08-2005 | KV-E2531D | Hi i got a purle patch in the right top hard corner can it bee removed |
25-08-2005 | | sorry for the lack of info its a Sony TV is ther any war to make a recall or deguise (rest the tv like u do on monitors)
Thanks
Kenny |
25-08-2005 | | Well, seeing nobody has answered.............
Then maybe I have luck with this:
Does anybody know if these old cameras (like mine) have a protection fuse, and in the affirmative case, where I can find it?
I would really appreciate any answers about it. |
25-08-2005 | tv | [quote="drum"]sorry for the lack of info its a Sony TV is ther any war to make a recall or deguise (rest the tv like u do on monitors)
shut tv off and unplug ac power cord from the wall.wait 5 minutes ,plug tv
back and power the switch. spikes5390 |
26-08-2005 | | [quote:342f1bdea3="Anonymous"]Thank you, [b:342f1bdea3]plamensl[/b:342f1bdea3]...
¿Samsung 710s = LG Studioworks 710s? :roll:
Salu2[/quote:342f1bdea3] |
26-08-2005 | Need service manual for mitsubishi vs-7083 70" tv or si | The convergence is very messed up on my 70" mitsubishi television. There are blue and yellow/lightgreen shadows around the outside of everything, except in the very center. I'd like the service manual to see if there is anything I can fix...thanks! I a |
26-08-2005 | Panasonic CD Stereo system | Panasonic Model SA-AK88.I got the problem with my cd stereo system.When i push the button on,i can hear "clik"(relay)and i see only P61 on the LCD display.No function cd,tape and radio.Only red led on stand by.Help me.Thank you. :cry: |
26-08-2005 | | try disconnecting speakers, if f61 still appears fault is usually a short circuit output ic, f61 is protection code and will prevent unit turning on. |
26-08-2005 | | no is not.
Go to the electrician immediatelly, if not you'r tv will be dead. |
26-08-2005 | pls i need a service manual 4 samsung gsm SGH N288. | pls is therte anyone who can give me a service manual for samsung SGH N288, or have information on how to repair network problems with it,s transmission. |
26-08-2005 | | www.promelec.ru |
26-08-2005 | | http://www.promelec.ru/schemes_list.html?3 |
26-08-2005 | | :D [b:3aa7d40ba5][i:3aa7d40ba5]send me an em,[email protected]
also give me full model nr and the location of the component on the pcb....is your set an ak19??
regards mike
[/i:3aa7d40ba5][/b:3aa7d40ba5] |
26-08-2005 | | :D em me at [email protected]
i may be able to help you |
26-08-2005 | | i have the same issue, what did you do or find out? |
26-08-2005 | | 13 flashes of the front led is telling you there is a fault in the frame stage normally dry joints on the frame chip. |
26-08-2005 | Adastra 6ch 120W PA Amplifier - blows fuses | The power amp seems to be the problem - if I isolate it, the pre-amps work fine.
Its a 4 x TIP35C unit.
I have a full set of circuit diagrams, but I am very rusty on servicing. I would appreciate some hints on where to start looking.
Thanks
David |
26-08-2005 | zenith big screen problems | the model number is Z60Z83D8
and the serial number is 781-16291392
Manufactured July of 97 |
26-08-2005 | | Hi,
Thank you for your kind help John.
Since it's chassis L01.1E, I will check diode 6406.
HT is fine at 140V. I will look for IC7515, I take it that it may need replacing?
I will also now check 6541 on the chassis.
Minnie, thank you al |
26-08-2005 | | Sorry, I meant:
Since it's chassis L01.1E, I will check diode [b:cb3ed8e850]6467[/b:cb3ed8e850]. |
26-08-2005 | | Thanks for the update glad to hear it works now, 3 quick questions though:
1. What model of TV was yours I believe you had indicated it was a Hitachi 50fx30b, but I don't see that part number in the service manual (pdf).
2. Can you describe the par |
26-08-2005 | zenith B25A10Z | Did you ever get the schematic? My color on the same chasis went out. I also need a schematic.
Thanks
Rich |
26-08-2005 | 83 ramcharger need help trouble shooting | I Just got an 83 ramcharger for free from a friend who moved out of state and the battery blew up on his brother when he was driving it. I replaced the alternator and voltage regulator and it turns over the starter is drawing over 300 amps and its only su |
26-08-2005 | *** SONY BLINK CODES *** | Does anyone know what the 10 blinks code means on power - standby LED for SONY TV model KV-HZ29 M65 ? Audio good but no video.
I've never fixed a TV before but I'm no stranger to fixing electronics. I wouldn't want to spend a lot of money into it. An |
26-08-2005 | SERVICE MANUAL FOR VERTEX FT2800M | I NEED SERVICE MANUAL OR SCHEMATICS FOR VERTEX FT2800M MOBIL RADIO |
26-08-2005 | | Philips part #483531057554. This remote puts the tv into a service mode, or it should. My biggest pissers with philips newer stuff has been replacing the flyback. If the voltage is slightly off it will cause the tv to shut down. This modle is not listed y |
26-08-2005 | Need service manual/schematics for RCA f31632et ctc187chass | A friend and I are working on a television together, and would like a nice set of schematics or a full blown service manual.
The picture on the screen shrinks and then goes back to normal size. I've found a few bits of information on the internet, but |
26-08-2005 | | Power supply/sweep module 9-1674-03.
http://www.tvparts.com/
$95/$105 cost. List, double it. To get a password from them you must email them. I don't even bother to trouble shoot them. Plop a new/reman module in it and be done with it. All you have to |
26-08-2005 | | Check F903. |
26-08-2005 | | Repair all solder connections on IC201 "A" Board (Horizontal Drive Ic TDA8302)
Also see if q502, q601 and q602 are shorted. |
26-08-2005 | | This is what I know.
# Continuous Blinking: Not getting reply from IC301 Jungle IC, Bad "IK" video path, possible short to ground
# One Blink: Not used
# Two Blinks: B+ over current protect, short in power supply or HV circuit
# Three Blinks: B+ over |
26-08-2005 | | I've never herd of a 10 blink code. |
26-08-2005 | will not power on | I have a 52" RCA model # P52810LV.Turned it off one night and next morning would not come on.No sign of trouble that night.My husband thinks it might be a fuse but we dont know anything about t.v.s.Is there anything we can check ourselves before we have t |
26-08-2005 | Re: tv | [quote="spikes5390"][quote:9846e8096f="drum"]sorry for the lack of info its a Sony TV is ther any war to make a recall or deguise (rest the tv like u do on monitors)
shut tv off and unplug ac power cord from the wall.wait 5 minutes ,plug tv
back and |
26-08-2005 | | Not really. If you have a digital multi meter check the hotizontal output transistor to see if it's shorted. |
26-08-2005 | | You need to get ahold of a Degaussing coil. If you have speakers near it, move them. The crt's color's off. You can also try turning it off and on a couple of times if you did have speakers near it. |
26-08-2005 | | Don't forget to resolder the vertical ic. |
26-08-2005 | Hitachi CBP-260 Flyback search | Hello,
I'm searching for a flyback transformer for a Hitachi CBP-260 television.
Where might I obtain one, can any good soul tell me.
Any help appreciated.
Mikel |
26-08-2005 | | No Matches for Model: CBP-260. Please recheck model number.
That's what I got when I ran your #'s. |
26-08-2005 | | Thank u for the reply... how sure are u that this is the problem, and what could i do to troubleshoot it to know for sure.... |
27-08-2005 | | 3 modules in it. Power/sweep, video, and convergence. #1 replaced is where I led you. I can't guarantee anything. But that's what I would do. OR Pay about $400. I doubt its convergence. Doubt it's on the video board. Unless that’s where they put the horiz |
27-08-2005 | | [quote:5bb77ff099="micuadriandanut"]no is not.
Go to the electrician immediatelly, if not you'r tv will be dead.[/quote:5bb77ff099]
??? |
27-08-2005 | | Yes. You can program them the same as a vcr! |
27-08-2005 | | Ok, I took it apart, i'm guessing that the power supply board is the one that the power wire runs into... and the one to the left of it is the video.... The only wire that i see giving me a problem is the thicker red one that runs into the top of some gre |
27-08-2005 | | Get the new board and swap wires for wires. Cut and splice is the LAST option. |
27-08-2005 | Is impossible | find schematic for Starmedia 3024 DVD player? |
27-08-2005 | | Up ! |
27-08-2005 | | Thanks! The Tv is now working fine! I used a strong magnet and have done it just like you told me to do! U have repared my TV!!!
:lol:
Thnaks!
Regards! |
27-08-2005 | | HELP ME .....!!
PIXMA IP 2000 RESET EEPROM General Tools and service manual.
thank's
syamsir :roll: |
27-08-2005 | | help me.
Pinter PIXMA Ip2000 ink tank full .
please copy Software General Tool.
Trims's
[email protected] :shock: |
27-08-2005 | Sony TV KV-2187 | flyback transformer and H.stat not available in Mumbai India please suggest |
27-08-2005 | Re: 50" zenith tv convergance issue | [quote:5df3b9f13b="riverdale"]I have a 50" zenith television that i just replaced the hv splitter and focus block on. Originally, all i had was sound,but no picture. after replacing the splitter and focus block, i now have video, but a very bad converga |
27-08-2005 | | [quote:30451cbe78="minnie"]No Matches for Model: CBP-260. Please recheck model number.
That's what I got when I ran your #'s.[/quote:30451cbe78]
Thanks for that. The model number is correct. The chassis number is
NP 9A if that is any addition. This |
28-08-2005 | Need power supply schematic for the monitor NESO FD570A | Hello,
need power supply schematic for the monitor NESO FD570A.
[email protected]
Thanks |
28-08-2005 | | OK pepople out there! Good news about this topic:
I already obtained a Service Manual for my camera. Now, the question would be, as I don't know how to read these things, if someone in this forum is able to find where the fuse(s) is/are, by me sending th |
28-08-2005 | | It meas the calibration might have changed |
28-08-2005 | searching schematics fod Denon PMA-540 | Please anyone have schematisc for Denon amplifier PMA-540 |
28-08-2005 | Laptop LCD white! | When I turn on my ASUS L2000 the screen flashes from black to white (when it should display something, like the bios)
This happened after I changed the resolution from 640x480 to 1024x768 (always used this) under safe mode with VGA (windows xp)
The LC |
28-08-2005 | panasonic tv tc29a11z scmatics help please | tried replace caps and resistor but no go on cold start please help thanks |
28-08-2005 | Laptop LCD | Well, i assume you have tried decreasing your display settings while connected to a monitor and then retried your lcd with no success ? Since you took the board out, did you check out the fuses, i know some of these units have a tendency to blow the fuse. |
28-08-2005 | | It was some time ago that i had it but i will look around to see if i can find it..... it was just a scrap of paper! |