|reply for F61 problem
|i would like to add that this problem (f61 in display) occurs sometimes not always.my customer told me that sound is ok but i haven't checked yet.
|Directions for replaceing convergence module:Zenith rb50m88w
|HELP!!!!!! :) anyone have directions for replacing the convergence module...I found the module online but no direction on replaceing
|Yellow display in Advent tv q2735a
I need help me I take a Advent tv model q2735a. A few day the tv sometime the display in yellow color. I clean all inside with clean duster but not all time the problem persist. If any take information or recomended, posible i need soldering again
|We want free!
|LED's won't blink until the lamp fails. Then the voice "Check the lamp."
|Then research it with Google, etc. yourself!
|printer controller Rw 470
|I need RW 470w printer controller use for Aficio 470w
|You're not going to find one here.
|I badly need the default option byte settings for this set. Please.....
|I appreciate the quick responses. Normal LED action going on at this time. Unfortunately, I don't have a replacement lamp as of yet. Though the growing consensus from other sources is that, while not quite as describe in the manual, the behavior being exh
|If the lamp is not the problem this time, you can be assured that eventually you will need it. Better to buy it now before prices go up.
|check the fan is rotating freely, the grease often hardens in the bearing and inhibits the rotation, on most panasonics the micro will detect this and shut down giving a misleading F61 error code.
|Thanks for the response. That's my plan, as pay day is on Friday.
Thanks for the help.
|Try to re soldering RGB PCB ( small PCB behind CRT ) specially at blue cathode ( BK ) line.
|I need a Toshiba Satellite 1700 service manual
|Can anyone post one, please?
I can only find a "part2" file.
Thanks in advance,
|Re: Fender amp repair
I´m trying to fix a Fender Blues Junior amp for a friend. Seems like a simple dry joint or broken connection, but I´m stuck at the first hurdle because I can´t see how to remove the knobs from the pots
|What you referring to is not a service manual--only a basic "how to take apart" in 2 sections.
Disregard the name & look about the middle of the page where it says "multipart", you will see both sections 1&2.
|Cheers - the first ones I tried to take off seemed set fast and I thought there must be some hidden allen screw or something, but once I got the right feel they all came off fine. Must have been a bit stiff because they hadn´t been taken off for ages
|Not necessarily.... Not knowing your skills level, suggest reading the page completely. Seems like there has been some reverb modification due to inherent design issues that may be related or you may have a genuine problem in the circuit.
Do not attempt
|I´m reading the page now. There´s a lot of good information there, thanks!
I´ll need to have another listen to see if theres a fault there.
I would be confident to do a modification with this quality of information, but it´s not m
|Could be short circuit at regulator output, try to disconnect power amplifier then turn it on again, if your Aiwa can turn on, you must replace the amp IC.
|Harmon Kardon AVR 525
|I need to change a capacitor (C106) on the Front PCB board of my HK AVR 525. Does any body know how to access the front PCB ?