|24-03-2008||Service Technician||[quote:8b0da7b180="galaxyre"]We are still hiring. We are also taking on trainees, but you must have an understanding of basic electronics, and either be attending school, or plan on attending school.
Position is based out of Brooklyn, NY
|24-03-2008||What I know Micro Korg using an adapter (AC to DC). Maybe only your adapter burning out.|
|24-03-2008||Service manual for EK2012 Sennheiser radio mic receiver||Gday to all, great site
I am looking for the service manual for this unit if anyone can point me in the right direct I would be mighty appreciative
|24-03-2008||check RGB transistors,or CRT|
|24-03-2008||do you check voltage on suply and RGB|
|24-03-2008||[quote:aa669d51d8="You Are Nuts"]
Are you on drugs? I'd like to know so I know which ones to stay away from.
I think you oughta have your head examined
my .02 cents[/quote:aa669d51d8]
Yes, I'm on a program to do away with my addiction to $85 service|
|24-03-2008||MGA CS2015R||I have a MGS CS2015R TV. Every time I turn it on, it goes through a cycle to find all TV stations available. Ultimately after about 5 minutes it comes on and all stations receivable are found. The remote does not retain this information. How do I |
|24-03-2008||Why would you post this in the Buy-Sell-Trade board?|
|24-03-2008||wow hello people!!!!!!!!!!!!
pay attention at the back.|
|24-03-2008||me too many thanks great site and very usefull|
|24-03-2008||I am having the same problem please send me a pic||Please send me the same info. [email protected]|
|24-03-2008||Proview MA-782KC Power Supply Problem||I have a 2 year old Proview MA-782KC flat screen 17" monitor.
(Also known as Proview 700P)
That has developed a fault in that it does not switch on.
At first, it took a while to 'warm up'. But now does not light up or anything.
|24-03-2008||Wharfedale lcd3210af||Poss psu fault with this tv.Standby led flashed once when turning on.Removed psu and checked no obvious faults.Replaced and all ok for a week.Now no led or power at all.Help please.|
|24-03-2008||You forgot to mention the site is in Farsi. Pretty useless unless you can read that crap.|
is updated about the marking case of the N3856VG.|
|24-03-2008||[quote:cda8971580="barnesmr1"]Thanks man, you've been more than helpful. I will order [url=http://www.discount-merchant.com/ProductDetails.asp?ProductCode=1007947%2DN%2FA&Show=TechSpecs]this[/url] PS and let you all know how it goes in a week or two.[|
|24-03-2008||PCB2310 R133 resistor||I don't think R133 is 800 ohm, rather 0.1 ohm. R133 on mine is Brown, Black, Silver, Gold which equals 10*10^-2 @ 5%. This is obviously a design defect as I've seen several of these on forums with the same issues (including mine). I am going to replace|
|24-03-2008||Thanks for your reply,
Big Capacitor: 375V
Next Capacitor: 132V
L1 (VOS): 185V
L6 (VFRAME): 20V
RGB (if you mean in crt panel):
both 210V in collector of transistors...
*(measures in scart-mode without scart plug-in, black s|
|24-03-2008||Re: Guruuu aint||Thanks,
It did not help, still makes whistling sound.
I could change the hole powersupplykit but would it help?
Is it an power udjustment?
This are wery strage problems with the restarting thing.
For the monitor that is completly dead and want turn on, please check
the two operating 12V and 5V with the mainboard not conected to the power board.
f the power is not present chec|
Are you shure that the ac adapter is ok?
The charger has 3wires, maybe one is damaged.
Cann you try with another charger?
please note that only dell charger works.|
|24-03-2008||Whery strange :shock: sow like you said with or with out mainboard connected the power suply does the same.
I bellive you have a some defective capacitors maybe the 120uF/400V.
Second thing that you should check is the part "TL431".
Parts-Service & Schematic included, $9.99 and instant download.
|24-03-2008||try to change resolution on PC. try with 800*600 mode.
If not Eepron is damaged.|
|24-03-2008||Vestel 11AK19 power supply problem||A tv with this ill-fated chassis (28", 4:3, 110° crt) was completely dead at first instance. After replacing two diodes in the mains rectifier bridge and R817, the power supply starts but is tripping. I have tried disconnecting all loads (removed L80|
|24-03-2008||You should check some resistor near the two transisitors, some kind of resistors with the value 1Ohm, 2,2Ohm.
Do you have a green wire on the output the power suplly?|
|24-03-2008||One good spare parts supplier that seems to active all over Europe is Nedis, www.nedis.com . However, when needing general electronic components, i prefer to buy from RS Components, Farnell or Elfa, then there is less risk of getting suspect off-brand par|
|24-03-2008||Often, there is a duplicate nameplate glued somewhere inside the set, for example on the cone of the CRT. Another possibility is that the chassis designation might be printed in the silkscreen print on the main PCB.
For identifying the year of manufact|