Date | Header | Text |
23-12-2007 | DAIWA POWER SUPPLY TYPE SS-330X | [color=red:a70abd04a1][b:a70abd04a1]I badly need schematics and pcb layouts for the above unit.[/b:a70abd04a1][/color:a70abd04a1] :(
I have several of them, running a complex communications system and having recently won a contract to keep the system |
23-12-2007 | Hitachi 50EX16B Protection LED | I have a Hitachi Projection TV Protect Led would come on no other Leds (green) would relay would click when power button was pressed. I replaced I901(STRM6511) as well as STK4274 (3). Now set comes on but protection light comes on and -27v led does not li |
23-12-2007 | THRESHOLD FET Ten/e HL preamplifier Service manual | Hi friends,
I am desperatly looking for the Service manual of this audio preamplifier built between 1980-1986 by
THRESHOLD Audio, Inc.
P. O. Box 41736
Houston, Texas 77241
U.S.A.
Please contact me by email , |
23-12-2007 | jk07132-a | Ok here goes I have a Hitachi rear projection TV model 43FDX10B and the Blue convergence went wacko, I located the board I suspect is the problem the JK07132-A and removed it. I see the STK392-120'S but since I am not confident If I can replace them mysel |
23-12-2007 | | Deflection power board NLA. So, either you have to bite the bullet and do it your self or take it to a shop and ask them how much to change the IC's and check the resistors. |
23-12-2007 | Deflection power board NLA???? | Minnie thanks for the quick response however I am uncertain what you mean by Deflection power board NLA, is this the JK07132-A were speaking of? If so then perhaps I could replace the IC'S like you suggest as opposed to the entire board. I talked to seve |
23-12-2007 | | Do not have the schematic, but looking at the pictures on the net, it is not that complicated of a device as it is a standard adjustable regulated power supply. More than likely there is a common device failure.
If/when there is an absolute need with |
23-12-2007 | searching for Sanyo PLC-8800 projector service manual | I an looking for a service manual for the Sanyo PLC-8800 projector. The specific model is PLC-8800(N) but I believe others in the series would be helpful. Service menu info is of particular interest.
Thank you very much. |
23-12-2007 | Mitsubishi WS-55511 - Red horizontal Convergence wont adjust | Hello,
I have a Mitsubishi ws-55511 that as of a few days ago my dod chewed the remote and as of then the colors were wayyy off. I bought a new remote then looked at the convergence and found the red was off more than a lot. I was able to adjust the re |
23-12-2007 | | You may get better response by posting at diyaudio.com forum.
"Nelson Pass" himself frequents the forums. |
23-12-2007 | | Replace the 2 STK392-110's. |
23-12-2007 | NovaJet 800 | I ned a service manul for my plotter a novajet 800
tank you |
23-12-2007 | | Your going to need a soldering iron with a thin tip, .050 solder wick, heat sink compound, and solder.
http://www.matelectronics.com/
Under product search enter STK392-180 (392-110=11 watts 392-180=18 watts)
Remove the 4 screws going through the I |
23-12-2007 | | If you have any other questions, just ask. There's 6 resistors you also need to check. I have a cool PDF if you want to pm me your email that sums it up pretty easy! |
23-12-2007 | Panasonic NV-VP31 schematic or service manual | Hi,
Pls. I'm in need for a schmatic for Panasonic NV-VP31 or sevice manual for some modiifications
Thanks |
23-12-2007 | | This Parts & Service manual can now be purchased for $10.79 and downloaded immediately after payment from:
http://www.justmanuals.com/encad-novajet-series-parts-service-p-15332.html
7.5mb
[email protected] |
23-12-2007 | | Yes I know that, vtech: it is already done...
He has not yet replied but we are in a vacation period: but the other diyaudio forum members do not have this bloody service manual... |
24-12-2007 | Harman Kardon TD 470 (Stereo Cassette Deck) | Hello everybody
I need to "Harman Kardon TD 470" (Stereo Cassette Deck) Service Manual. Please help me.
Warm regards
A. Azarm ([email protected]) |
24-12-2007 | | the control board must be replaced with the new one, it is mounted behind the av input board, the replacement one looks different and is physically smaller but does the same job, dont forget to swap the heatsinks over. |
24-12-2007 | | Harman Kardon TD470 Service Manual
[url]http://www.free-service-manuals.com/Detailed/37765.html[/url]
Price free
size 8.90 MB |
24-12-2007 | service manual for Denon DRA 325R | Dear EliP85!
I have the same reciver you asked for and I am also need the service manual.
Do you have it?
Can you please send it to me by email ([email protected]).
Please advise,
Thx in advance
nataf |
24-12-2007 | | Denon DRA-325 Service Manual
[url]http://www.free-service-manuals.com/Detailed/26970.html[/url]
price free |
24-12-2007 | | [quote:f6e5533446="Anonymous"]Funny I should stumble on the site.Buddy, please eat your words with hot sauce so they go down faster. As stated above, the answer is yes to nicads. niMHs possibly. You set up a charge memory.
Now my turn to eat,I have |
24-12-2007 | Request for service manual for sony FH-B511 | In play mode CD spins for approx 5 seconds ans stops.NO DISC appears.cleaning the lens through limited areas does not clear the problem.Ineed the disassembly/reassemblyand trouble shooting information to repair both the CD and DOUBLE CASSETTE system. Ple |
24-12-2007 | Ericsson DECT DT200 and BS230 | Hi everybody,
I'm repairing an Ericsson DECT phone that has a intermittent problem on the mic.
Does anyone has the service manual or schematics for the Ericsson DT200 mobile and the BS230 base station?
Thanks in advance |
24-12-2007 | yamaha r3 dead set | hello to all,
my yamaha r3 has no lights and no audio, but before this happened im hearing a high pitch sound for up to 1 minute before it powers up. the step down transformer. bridge and filter capacitors are ok
can someone please help me with this ? t |
24-12-2007 | 50UX26B Hitachi big screen tv, No sound & somewhat a Pic | I have a 50UX26B Hitachi big screen tv for about 10 years. No fuses as ever blown.
About 6-months ago, a solder joint blow out on L903 in the Power Supply area, So all I did was resolder that joint and the tv worked again. :)
A few days ago, I |