|REALY, this is the expert advice? surely there must be some people here with knowlege they are willing to share???
|pdp5060hd pioneer plazma question
|My Plazma is just about 3 years old... and now will not power on without immediatly powering off. once it powers off i get 10 blinking lights on the set. this TV came with a seperate reciever but no blinking lights on the reciever only the TV. Pioneer say
|[quote:65bda7822d="toolong"]If you have a bad scan drive IC you will knock the board right out again if you don't disable drive to it first to check for other issues.[/quote:65bda7822d]
care to explain?
|Re: sony dsc-w30
|Just ask for your Level 2 and Level # service manual on
http://forums.micro-tek.co.in in camcorders service manual section. I will upload the manual for you..
im lookin for a level 2 service
|Free Service Manual DCR-PC109 Level 3
|Download the free service manual DCR-PC109 Level 3 for free ..
Visit the following link:
Kindly register to this site..
|Samsung L200 POwer failure
|Fully charged L200 powers on for a few seconds, 3 beeps and shuts down. Why?
|hi , what you think , is it faulty display on that Fujitsu plasma 42" or something else ?
|[quote:1e211b2ebc="Anonymous"]REALY, this is the expert advice? surely there must be some people here with knowlege they are willing to share???[/quote:1e211b2ebc]
You want expert advice don't come to a free forum :twisted:
|Ive got a Philips 51PP9200D/37 with all three pic tubes,Crt boards,and convergence boards.The Crt boards will fit your tv.Ill sell them cheap if you need the parts.The whole tv works exept for the power supply.
i have a truckline cc 40 i know the code but it is locked 13
Me Lara Croft,
If you want to download eeprom bin you should visit rapidlibrary.com site.
Where you can find what ever you want.
|Hi my friends , please anyone know ? .... I need that advice , please help .....
|lights on ctrl board, do i need a new board?
i have the Lg rz-42px11 which has 6 black two inch vertical lines up the middle of the screen, ive taken the back panel off and can see that the board in the middle (underneath the scart connector boards) which i assume to be the control board has 3
|Covergence problem on Toshiba 42H83
|I have a convergence problem with my Toshiba 42H83, i replaced both of IC's STK392-110 and one of the 1.8 Ohms bad resistors near of the STK, i checked every 1.8 ohms resistors, everything around the IC's is fine, but i got same convergence problems.