Date | Header | Text |
19-03-2008 | daewoo tv | my daewoo is 2 years old, been in the same spot the whole time, about a 3rd way down on screen, the pict gets distorted and it comes and goes, you can hear the tv make a sound when this happens???help |
19-03-2008 | blaupunkt radio in safe mode | I have a blaupunkt gamma cc radio from an audi that is currently in safe mode, so i cannot enter the code. Any ideas on how to get the radio out of safe mode? Any help I can get will be greatly appreciated. |
19-03-2008 | RCA 36" TV | i have a rca 36" tv, i just replaced the flyback transformer, mine was arcing out, i desoldered the old flyback then soldered the new one in. turned on the tv now i have audio but no video....
any ideas? |
19-03-2008 | | Got a model #? |
19-03-2008 | | Got a model #? |
19-03-2008 | Re: jvc AV-2176 | [quote:1f4934bfa9="Anonymous"][quote:1f4934bfa9="gry43"]Need help for my tv, i need schematic diagram for JVC AV-2176,thanks in advance[/quote:1f4934bfa9]
up[/quote:1f4934bfa9]
Up what? |
20-03-2008 | Hyundai HPT-4240 - Dodgy looking caps a cause for concern? | Hi everyone,
I think I know the answer to this, and it’s an easy one, so here goes.
I acquired a Hyundai HPT-4240 Plasma TV from an insurance write-off when the classic black strips occurred, and I fixed these previously with no problems. However, |
20-03-2008 | | F36683ET |
20-03-2008 | | Just for the info of the forum - yes, it worked.
Picture is back to normal.
Thanks for the hint.
:) |
20-03-2008 | SANYO DP26647 | 3 MONTH OLD, did not purchase any warranty. The sanyo DP26647 has the LCD light, but no picture or display or OSD. It has sound and switches channels. May someone help me where to get parts for this problem.
thanks
esi9132 |
20-03-2008 | | Good observation but more than likely those caps are ok:
While there can certainly be the top body bulging, Those are actually round plastic covers that tend to bow out & give the appearance of a bulged cap. To be 100% sure, try pushing down on |
20-03-2008 | | I to have the same problem. Replaced the convergence IC's and still same problem. The set will not power on. I get the relay clicks and all the led's come on but it makes a whine sound over and over like its trying to start but never comes on. I dont kno |
20-03-2008 | bored Daewoo tv. | Well!!!- How would you feel if you'd been in the same spot for 2 years- only watched by a moron- would't you complain?- I'll bet you would!. You see girly, the tv has more brains than you! I suggest that you take the tv out now & then- for a drive, or |
20-03-2008 | | Yea i replaced all three parts and its still not working will the diode blow the IC |
20-03-2008 | Replacing Convergence IC's on Tosh 55h70 | I was wondering if anyone knew if I could use STK392-180 Convergence chips on the Toshiba 55h70 or if needed to stick with the STK392-110?
I have read so much were the IC's were replaced and went bad not long afterwords, and wondered if the 180's would g |