|07-10-2013||Denon DCD-1290 parts||Does anyone know where I can get the CD mechanism for a DCD-1290? This is part # FG50 according to the service manual. Denon says it is not available. Does anyone know where I could obtain this part?
Failing that I would be looking for the laser, an|
|08-10-2013||Seeing as how you consider this late 90's CD player to be some kind of 'durable goods,' the best one might hope for is to find a used one along the curb on garbage day, maybe craigslist, ebay, thrift store, garage/yard sale, barn, landfill, etc.
|08-10-2013||12v 19" LCD TV - Reverse voltage||After sucessfully running my TV from a 12v, 1.5A power supply, i decided to hook it up to a car battery. But i used a plug that wasn't labelled. I had a 50/50 chance i would get it right.
As soon as i hooked it up, there was a spark from the wire. I co|
|08-10-2013||Re: Ricoh fax 3310 LE||[quote="Herman"]I am loking for a service manual for the ricoh fax 3310 Le[/quotانا مهندس عربى اريد الكود نا|
|08-10-2013||Re: Ricoh fax 3310 LE||[quote="ahmadramy"][quote:4fd1b2b701="Herman"]I am loking for a service manual for the ricoh fax 3310 Le[/quotانا مهندس عربى اريد ال |
|09-10-2013||Re: Denon DCD-1290 parts||[quote:8ab3c71d10="DenonFan"]Does anyone know where I can get the CD mechanism for a DCD-1290? This is part # FG50 according to the service manual. Denon says it is not available. Does anyone know where I could obtain this part?
Failing that I would|
|09-10-2013||Service Bulletin||Be aware, repairers, there is a bulletin for this product, to address a common CD fault resulting in TOC ERR. Repair is to change SMD resistors on the CD Mech controller PCB and eliminate distorted CD player 'eye' pattern.|
|09-10-2013||Remove stuck CD||These models with part numbers around xxx-x018, xx-x020 and so on suffer sometimes from slipping CD load/eject rollers. Basically have to dismantle to fix properly or try something like hotter/colder temperature.
You know this is problem if motors run|
|09-10-2013||thanks for the advice|
|10-10-2013||Turns out i blew a fuse. The fuse was covered in heat shrink.
The TV still works, but the backlight is really dim. I found out it had 22v, 800ma powering it at the time, so i wired 2 12v transformers in series, directly to the 48 SMD LED strip. It runs|
|10-10-2013||Re: philips hi fi tray 'locked'||THANK YOU!!!!![quote:0dcf6f71cd="jimjams"]Try, unit to s/by then press DISPLAY button on front of unit[/quote:0dcf6f71cd] :D|
|10-10-2013||Need help with lcd powersupply||Hi.
My grundig 32lxw82-8600 DL powersupply has no voltage on panel pins. I think the rest is ok. I tested everything and all are good but i get no power to panel (grey display).here are the voltage reading from powersupply to logic board.