Date | Header | Text |
04-10-2007 | Blaupunkt Oslo RCC 24 and MP3 Player | Is it posible to connect this car radio and mp3 player.
Thanks |
04-10-2007 | | if you cant align it with customer menu,i believe this one might use one ic located behind the front speaker grill,behind removeable panel.stk 4277,upgrades to 4279.if so change it WITH original pioneer part. |
04-10-2007 | | Yup. This should fix it. I'd say 80% chance. |
04-10-2007 | A/V Tech Wanted - NYC/Brooklyn | Looking for QUALIFIED service technician to handle repairs of audio & visual equipment in the Brooklyn & NYC area. Experience is a MUST (recent tech grads OK, but must possess extensive knowledge)
We are NOT looking to train anyone at this tim |
04-10-2007 | | :D
Old post but the info stays the same!!! |
04-10-2007 | | [quote:7e1a024f22="vtech"]Are you getting the same results using ANY of the outputs or have you tried them all? (component Vs Svideo Vs Composite) I have worked on quite a few units and color symptoms almost always had to do with connections on the RCA |
05-10-2007 | Canon Ixus 50 Repair/service Manual | Hi,
Does anyone have a complete [b:a3d462cf2d]service/repair manual[/b:a3d462cf2d] for the [b:a3d462cf2d]Canon Ixus 50[/b:a3d462cf2d], or a similar model (ie. Ixus 40, 55, 60)
I would greatly appreciate a copy
Cheers,
Dani
(my email :arrow: c_M3 |
05-10-2007 | HP officejet 7210 | Does anybody have schematics for an HP officejet 7210? |
05-10-2007 | | This Parts & Service manual can now be purchased for $10.79 and downloaded immediately after payment from
http://www.justmanuals.com/product_info.php?products_id=9543
[email protected] |
05-10-2007 | | There is nothing in the way of manuals available for this printer. It is part of the 'HP disposable' line.
There are very few manuals available for any Officejet.
[email protected] |
05-10-2007 | ST "PK030S" Transistor Dataseet | I am looking for a datasheet for a ST "PK030S" transistor. It is in a TO-3PF package, and has an internal diode between collector and emitter.
This particular device is a regular NPN transistor, not a Darlington. |
05-10-2007 | | :?: Testing resistance on 300 mill volt setting on a fluke VOM! Not sure I understand? Need to measure resistance on ohms scale setting--- not volt.
In camparison with analog meters, digital readings always lag due to inherit delay in reading/proces |
05-10-2007 | | Not sure if you are trying to find a replacement or just want to know what it is?
Looks like some sort of a "house number" made by ST--- probably used for several OEM manufacturers of consumer electronic(more likely chineese?)
What is it |
05-10-2007 | Hikona TC1400 (14" Combo) | I am trying to locate a new DVD module for this TV, one of the motors has burnt out. Does anyone know where I can optain one. |
05-10-2007 | A/V TECHNICIAN REQUIRED | I am from PAKISTAN. Iam working in this field since 1990.During this period I served in this field in SAUDI-ARAB for aperiod of six years and for aperiod of one year in BAHRAIN. My name is m.tahir masood. I have read your demands. |
05-10-2007 | monitor no display | i m using samsung samtron 56 , but it started to show ods menu again again , is i have to replace the zener diode which is connected to monitor swtich |
05-10-2007 | | Hi,
Thanks for the information. I'm gonna list all the capacitors and exchange them. I think it's just that they are too old and they have done their time. I will let you know.
Thanks again, Jerome |
05-10-2007 | Tv/vcr acts like it's ejecting a tape | My brother gave my wife and I a 19" Emerson tv/vcr combo to use in our bedroom. We have three little boys who decided it would be fun to stuff as many dvd's into the vcr slot as possible. I cleaned out the dvd's but when we turn on the tv, there is |
05-10-2007 | Philips 41GR8840 : Convergence problems | Hi,
I've got a Philips 41GR8840 with general convergence failure. All colors are distroded on horizontal lines and I can't fix it because I don't have the potentiometers' fonction (there are around 40 of them).
Is there someone which know the proced |
05-10-2007 | | A such problem can have many causes. It is common that the lamp or infrared LED that stands upp in the cassette compartment (there is a corresponding recess in the bottom of VHS cassettes) is bad or that any of the phototransistors on each side of the com |
05-10-2007 | | If the tv suddenly got a convergence problem, then there is a "real" fault that should be repaired before you try to make any adjustments. But in case the convergence has become gradually worse during several years, or after transporting the tv, |
05-10-2007 | | Most TVs can receive RGB via the scart connector, so any 14" TV with scart would probably fulfill your needs. |
05-10-2007 | 53H71 Toshiba Problem no Video. Lamps do not go on. | Here is the problem , I have a Toshiba 53H71 there was a blinking red light and it would not turn on i replaced the IC's the TV set turned on and was working fine. After about an hour same problem , i noticed the 851 was blown replaced it , than 850 blew. |
05-10-2007 | | By mistake i wrote 50-pin when there is a 52-pin connector.Please help,I`m still waiting... |
05-10-2007 | | [quote:a8ed8350e7="torbjorn"]Most TVs can receive RGB via the scart connector, so any 14" TV with scart would probably fulfill your needs.[/quote:a8ed8350e7]
True. But let me explain what I want to do, and you will see why I want a "monitor& |
05-10-2007 | Sennheiser SK 1012 and EM 1003 schematics or service manuals | Sennheiser SK 1012 and EM 1003 schematics or service manuals
Something wrong with transmitter
Does anyone have them
I already found the operating manuals
Tnx
Marcel |
05-10-2007 | | Did you check R7731/7726 1.8 ohm, R7711/7716 1.8 ohm, did you solder the 2 jumpers between the signal board to the deflection board located on the deflection board bottom side left side of the board just above the middle, jumpers at loacation 010 and 050 |
05-10-2007 | | http://www.doctronics.co.uk/meter.htm |
05-10-2007 | | http://www.datasheets.org.uk/pdf/pk030s-datasheet/pk030s-datasheet.html |
05-10-2007 | | problem is what minnie said.jumper under plastic housing cold soldered.plastic housing putting pressure on jumper and fuses blow.resolder jumper and replace fuses. |
06-10-2007 | keyboard on packard bell causing startup failure | i have a brand new packard bell easynote, modei Argo C2.
MS-MODEL:ARC21 IN 003D;;;
SOMEONE IN MY HOUSE ONE NIGHT AT A PARTY SAT ON THE KEYBOARD.
THE CENTRE KEYS IE:TYUFGHJKVBN ARE INDENTED AND THE LAPTOP WONT GO INTO BOOT UP. IT GETS AS FAR AS SPINI |