| Date | Header | Text |
|---|
| 22-11-2007 | HP Photosmart C5183 (HP Russia) "Ink SYstem Failure&quo | :cry:
Need help this printer is still new but is giving me an erro message on the LCD screen 'Ink System Failure. I searched at HP.com but in vain. I later on discorvered that it is found on an HP Russian site. I wanted to use the firmware software bu |
| 22-11-2007 | | thank you Minnie |
| 22-11-2007 | BETA 4 Code need | I need Grundig BETA 4 Code, S/N VWZ2Z2S5372702,
made by Grundig Portugal. Thanks in advance. |
| 22-11-2007 | Re: LG Plasma RZ-60PY10 NO PICTURE | Problem with no picture is normally related to the Ysus and Zsus PCB's. There are fuses located on each but if blown expect to replace the Kit which consists of three boards. Normally available at about £47. Before Replacing check voltages running to |
| 22-11-2007 | Re: TV dropped on the floor | If everything is working I would think that you probably have a crack on the Pcb. This could be close to the area where the speakers plug in or somewhere else where the ic is not getting the required voltage needed for amplification. also check the speake |
| 22-11-2007 | Re: Samsung 17" monitor strange problem..plz help | Try checking the switch for consistency first. make sure the ac cord is connected securely. If not this means that the power supply is getting old. Try replacing some of the capacitors in the area surrounding the chopper transformer. if these are old it w |
| 22-11-2007 | Re: faulty fujitsu monitor | check the tube base board(on the neck of the tube) for dry contacts. you may have to remove the metal shielding first to check. Be careful not to put too much pressure on the socket as the tube neck can crack very easily. Hope this will help. |
| 22-11-2007 | Re: GE Televlsion has lost its video input...sorta? | Could be lose joints on the video inputs or a crack on the board. Also could be the Jungle IC (either a TDA... or LA... or TA... ). Not sure what set you have. If AV2 still works then this is most likely your Fault. These IC'S are static sensitive and ma |
| 22-11-2007 | | Have a look at this one i think it is the one you need, well thats what i have been told by a member.
Samsung LH19IS Service Manual
[url]http://www.servicing-manuals.com/Detailed/34240.html[/url] |
| 22-11-2007 | | @ManualDirectory
Then you so much. I find it[/quote] |
| 22-11-2007 | | Maybe Clark can also use his eray vision to find out what model it is as the original poster left that out. |
| 22-11-2007 | hi. Can you help me, please? | Hi, i'm an spanish user. Sorry, my english is very bad . :wink:
One friend of mine has the same problem, and he asked me about where to find the power supply scheme of this tv. Can you help us?.
Thank you very much |
| 22-11-2007 | hi. can you help me, please? | Hi, i'm an spanish user. Sorry, my english is very bad . :wink:
One friend of mine has the same problem, and he asked me about where to find the power supply scheme of this tv. Can you help us?.
Thank you very much |
| 22-11-2007 | | Sorry, i pushed the "new post button" insteed of the "post reply" button :?
I need someone to tell me where to find the "goodmans gtv30wlcd" power supply scheme. |
| 22-11-2007 | service manual for phonic poweramp model max2500 | hi.
could you pliz send me the service manual for the phonic power amp model max2500 |
| 22-11-2007 | | A Logic Not Circuit or Inverter would do the trick.
It has the opposite output than what is at the input.
It can be made out of one Transistor.
http://www.flatspike.com/projects/electronics/single-transistor-logic-inverter/
[img:c26120e360]http:// |
| 22-11-2007 | kenwood RXD-355 please help!!!! | every time i turn on my cd player it comes up with "protect" ......how do i fix my cd player?????? my email is [email protected] |
| 23-11-2007 | Minolta AD-2 and ST-201 | Looking for a manual for both units. They are used with an EP-5320 copier for which I also need a output tray.
Thanks,
Chuckm
Carson City, NV |
| 23-11-2007 | eMachines eview 17f3 Monitor not working | :D No surprise there, since I found it next to a curb, after a nice rainy day.
(I have "." this much electronics experience. Basically, I'm a guy with a soldering gun.
The water's gone, and I plugged it up; with power, there's a clicking in a |
| 23-11-2007 | | also, The Cap is manufactured by HEC, and it's a 150uF 400V, and there's another blue cap(can't see any details) near it that looks like it's corroded with something. |
| 23-11-2007 | arcking | My Sony KF-42WE610 has a problem, it is not starting up. What i found is the FS1 on the lamp drive pcb is arcking inside,do i need to replace that pcb[/code][code][/code] |
| 23-11-2007 | | Sorry for the delay, I was waiting for a buddy to let me borrow his soldering gun. Is it really necessary to fill the heat sink screws with solder?
Anyway, replaced the ICs, did a convergence adjustment, now it is as good as new.
Thank you very muc |