|Citroen Xantia Radio problem
|I have recently purchased a 1998 Citroen Xantia fitted with a 4035 RDS Audio System which has a problem as follows:
1. The radio will ONLY work if the on/off and the BND buttons are depressed simultaneously, it will NOT work using the on/off button alo
|well u can go for manul setting .... or refresh the setting...
|well that 's sound bad... i think the display light r damage or either make change the display ...
|well same driver i search was on Google.. they r easilu available .. u can just download from that...
|Thanks for your reply.
I got it.. It's a diode.
Called D851 in the service manual..
The problem now is that the service manual doesn't tell it's specs...
So now I'm stuck...again.. :roll:
|This is the broken diode...
Can anyone help, please?
|Mitsubishi HS-C40 camcorder
|Hello all, i`m new here!
I`m look for an service manual for my old camcorder mitsubishi hs-c40, svhs compact. After long time all electrolytic capacitors have been replaced because aren`t been good. The camcorder come to life but i got no recordind of lu
|please can ya tell me the reset procedure of philips car400..i have the code but forgot the procedure too get too entering the code point
|I Have a manual but it does help
|D851 is a fast recovery 800V .5A diode, Generic part#:[b:87d042e439]CRF02[/b:87d042e439] made by Toshiba
|YAMAHA RX-V2500 PA Problem
I hope someone can help with this:
I have a RX-V2500 on the bench with what I believe to be a strange bias problem on the SL channel output stage. DIAG mode displays DC Protect fault.
So here's the scoop -
Upon power up I read about -