Date | Header | Text |
08-09-2009 | samsung plasma no picture ? | just a quick question please.
i have a samsung 50q7hd plasma.
set has no picture panel seems dead?
i have noticed the green led 5800 is lit up on the ysus is that normal ?
anyone help. |
08-09-2009 | Display for microwave | What can you do if you have lost the interactive display on your microwave? |
08-09-2009 | | Troubleshoot and try to repair it?
I though ALL microwave ovens were interactive. My 20 year old one still "beeps" and displays each number button I press. :wink: |
08-09-2009 | | JTS is correct on troubleshooting. I had a microwave that lost it's display and trouble shot it down to thee transformer on the key pad. Replaced it and it worked great! |
08-09-2009 | | You need to start by disconnecting board by board from the power supply to see if you can isolate which board it is. Check your VS and VA voltages with and with out the boards plugged into the power supply. |
08-09-2009 | service manual hensel integra 500 | Hello , please help me , I need a service manual or schematic diagram for this equipment or similar ,because I need repair 3 units , the trouble is dont regulated the power min-max22
thanks :D |
08-09-2009 | | okay, pulled all the bottom boards that were bolted to the tray. Marked all the wires. and cleaned up the boards with some compressed air as they were pretty dusty. installed all boards temp, so i can connect wires to see if that helped. Tv started right |
08-09-2009 | | VS and VA voltages label on panel says va 63 & vs 207
with all boards connected
power supply ysus vs connector measures 207
power supply xsus vs connector measures 207
power supply bottom buffer va connector measures 63
with boa |
08-09-2009 | Samsung Microwave hit with 220V | I have a Samsung MR5492W microwave that is installed in a trailer as standard equipment. I recently had an electrician inadvertently send 220v to the circuit that the trailer was plugged into. While the microwave was not running at the time, it was plug |
08-09-2009 | | You need to unplug the y sustain and see if the set will turn on, then disconnect the x sustain and try again so on so forth... |
08-09-2009 | | http://forum.eserviceinfo.com/viewtopic.php?t=37064
Replace the convergence IC's..... |
08-09-2009 | plasma Television purple line picture fault | hi everyone.
done a quick search on forum but did not come up with any answers to my problem.
Have a plasma Television which was given to me on power up set suffers from a purple/red screen with small white & black lines ?
[img:834381c029]htt |
08-09-2009 | | It's both horizontal and vertical suspect logic or digital main board. It could also be the Y sustain. |
09-09-2009 | AVR 430 shutting off | I have had an AVR 430 for several years and it has always worked perfectly. The other day it just started shutting off after 2-3 seconds. No matter what source I turn on and even with no external hookups. I assume that some internal component has gone |
09-09-2009 | Denon AVR-3300 Service Manual Wanted | I would like to have a service manual for a DENON AVR-3300 receiver. If one is available, please advise. Thank you in advance!
:) :) |
09-09-2009 | 8825 | i need a copy of the servicemanual for the 8825printer ,can u please send it to [email protected]
Thanks! |
09-09-2009 | | This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from
http://www.justmanuals.com
[email protected] |
09-09-2009 | | This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
09-09-2009 | | They make great doorstops too! |
09-09-2009 | | [quote:8388a8e2af="Justmanuals"]They make great doorstops too![/quote:8388a8e2af]
what do you mean doorstops? |
09-09-2009 | | Not familiar with the specific set but based on your description, the color shift & ghosting may in fact be a problem within the CXA IC? Could you try freezing the IC with freeze spray?--sometimes it is possible to induce the problem within the device |
09-09-2009 | | Control Board - Power Transformer: Has AC voltages In & Out (open winding)? :wink: |
09-09-2009 | part numbers.... | Hi Minnie,
I didn't know about "partstore". Their prices are good. If they are listing the part as going into a Sanyo DP32746 I'me guessing it will also fit.
I was sceptical since the photos I found of part RDENC2548TPZZ look really di |
09-09-2009 | philips magnavox 8P6044 C102 | I have a big screen TV and lately, but not all the time (but most of the time), the picture will surge. Like it will get big and then smaller and then bigger repeatedly. Its dizzying. I know its an old TV. Does this mean its just dying or is there som |
09-09-2009 | 2001 Punto HGT owners manual? | HI
Does can anybody help with fiat owners manual for PUNTO HGT (2001 Y registration)
Thanks |
09-09-2009 | | Thank you! |