|29-03-2010||Toshiba||Try buying a tv that isnt 16 years old.|
|29-03-2010||Sanyo 42849||Check power supply for buldged top capacitors,also check capacitors and f1.f2 fuses on the inverter boards.You probably need a new power supply.|
|29-03-2010||Have you disconnected the Y and X and no change? Have you disconnected the bottom buffer boards or the Y sustain driver boards?|
|29-03-2010||74 cm||It wouldnt hurt to resolder the yoke pins where the wire plugs into the board.also could be a bad yoke.|
|29-03-2010||Need a copy of Service Manual for ROTEL RA-97 (Int. Amp.)||Hi every body.
'am new to this forum.
Will anybody help me by posting a copy of the service manual of ROTEL RA-97 integrated amp. Thanks in advance!|
|29-03-2010||Blown Zener like your case is the final effect not the cause.
Zener going to short circuit in that manner is a conseguence of very high
In this circuit The zener diode is (was) probabily acting as a reference
voltage source, and a|
|29-03-2010||[quote:388d0a9b8e="minnie"]You can try to adjust the screen voltage on the flyback.[/quote:388d0a9b8e]
Anyway unstable. Will not reach firmware spec. and CCC. in MICOM (UOC), so may work or MAY NOT.
Oh by the way IT Will NOT LAST AT |
|29-03-2010||TH-42PZ85 service manual||Hello forum.
I need a service manual for a Panasonic TH-42PZ85 plasma. I cant find it myself. Please help... :-)
|29-03-2010||Heh, true, that would come in handy. Here's the schematic of the affected area. I can post a more full image if it would help...
|29-03-2010||Re: some tips for you!!!||[quote:2b6592037c="eduard0476"]first of all i would like to know your Unit.. this is CRT TV type or LCD TV? ok well'' if this is CRT type did you check B+ line Volts? 100vdc? did you check HOT mean horizontal output transistor. now cause of high voltage s|
|30-03-2010||This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com