Date | Header | Text |
12-06-2009 | | In the past, Weller used RTD (platinum or nickel) sensors in their solder irons.
Maybe the simplest way of figuring out the specs of the sensor is to try connecting various resistors to the base instead of the sensor and check what the corresponding te |
12-06-2009 | hitachi 42hdt79 | For quite a while while in standby it would click click now and then.
Now it cycles on and off (PIC and Sound) every 15 sec's or so...
channel selection and remote don't work well at all....
MDB circuit board led's cycle thru a number of different |
12-06-2009 | Kenmore refrigerator Freezer Repair | Hope to cover Model 106.53554200
Thank You for looking
dwdw99 |
12-06-2009 | kenwood rxd-26 | Need the service manual for my old compact Kenwood RXD-26L .Is not working elctronico volume control. Thank you |
12-06-2009 | | Bad digital main board. |
12-06-2009 | | Remove the back and see if you can access the three tubes. If not remove the screen and clean off all 3 lenses. The focus block is under the speaker grill. |
13-06-2009 | | if you refer to LVDS main processor as main board in monitor, then it isn't faulty.
decoder board, cable, and matrix itself i'm not so sure about.
i checked power supply or main board by swapping them from identical display, so they work for sure. :/ |