| Date | Header | Text |
|---|
| 16-03-2005 | panasonic tv repair | i have a panasonic model ct 27g21u i t comes on and play for 15 minutes and picture go black still hear sound..what could be the problem |
| 16-03-2005 | | I don't have one in the shop right now but I think it might be a ground connection :?: I'm sure it is not what caused the IC's to fail though. More likely just died from heat fatigue or poor solder connections. :) |
| 16-03-2005 | | Chances are your CRT has weak emision on one or more colors. I have had prety good luck restoring these tubes with my sencore tester. they seem to last quite awhile afterward anyway. |
| 16-03-2005 | Sony jungle IC failure | Does anyone out there have any idea what might cause the sony jungle IC's to fail? IC 301 a CXA------ number. I have had several diferent set with this IC gone bad, now I have one with a repeat failure after about 3 weeks. Help :? |
| 16-03-2005 | | If HV stays on check CRT for weak emision. This will cause sony TV's to blank out the video. |
| 16-03-2005 | | If HV stays on check CRT for weak emision. This will cause sony TV's to blank out the video. |
| 16-03-2005 | | Test your CRT for weak emision. If weak the video is blanked out. They can be restored with a sencore tester and will usually last a year or so. |
| 16-03-2005 | Sony KV-M1420U | Hello
Can anyone tell me how to select an av device (eg vcr) input on the scart connector, using the remote?
Thanks |
| 16-03-2005 | | do you think they could have burned up when the hv splitter failed?? i am just thinking it is weird that it had a good picture, the hv splitter failed, i fixed it, and now the convergance is way off. i am going to try some ic's, but i just want to make |
| 16-03-2005 | SCHEMATICS FOR SDP4575 PIONEER | THE PROBLEM WITH THIS TV IS THAT IT HAS DOUBLE VISION ON THE BOTTOM 1/2 OF THE SCREEN. THE TOP LOOKS GREAT.IT HAS LOOKED LIKE THIS FOR TWO YEARS.ONE DAY LAST WEEK IT WORKED PERFECT FOR TWO DAYS. THE ONLY WAY I CAN REMOVE THE DOUBLE VISION IS TO COVER THE |
| 16-03-2005 | Philips 28PW8609 - need help with restoring the service menu | Hello!
I screwed up values in Geometry submenu and would like to ask if anyone knows if it's possible to restore the manufacturers values somehow or do I need to fix this manually?
If anyone is willing to help, please post here a full transcription of |
| 16-03-2005 | Re: Sanyo EC7-B service manual needed | [quote="dvidov27"]Need service manual for TV Sanyo CE21AT2-C chassis 2113 EC/-B series. Please send to : [email protected] |
| 16-03-2005 | | It is possible there was a power surge caused when the splitter failed. Be sure to check for open resistors on your convergence bd. |
| 16-03-2005 | Can't upload file!!! (Invalid file size) | Nomatter what I do, I just get this error:
Invalid file !
Invalid file size (max 2145.65625 KB )
Unspecified error !
The file was not successfully received. Please, try again !
I am trying to opload 1 pdf file of 5MB. After i tryed to split the |
| 16-03-2005 | factory settings | How do you put the Sanyo CE27LD3 - B back to the factory settings?
I have just bought this set and installed it but it should come up and say welcome to Sanyo but it won't.
I have reset the digital side of it and it does not find any channels on the dig |
| 16-03-2005 | | It is possible that you have a leaky switch. Try removing the channel switch and see if problem goes away :) |
| 17-03-2005 | | Hi,
You should split it into files smaller than 2 MB
I suggest using WinRar
greetings: Plamen |
| 17-03-2005 | defective software for 6600 | hi!
i would like to post a question regarding my nokia 6600,,im having a hard time looking for the problem of my unit..My units does open upon rebooting,,but the screen flashes the word phone start up failure,contact retailer.I had it brought to a many |
| 17-03-2005 | | Refer
http://chemise5.free.fr/sony%20be2a%2013981.pdf |
| 17-03-2005 | Schematics / service manual monitor SIMENS NIXDORF MCM 1702 | I very need... like subject.
Sylwek |
| 17-03-2005 | Service Manual available | Service manual is available. It will cost you 4 US$. For further information, contact [email protected]
Regards,
Davy |
| 17-03-2005 | ACER AL511 schematic and service manual needed | Please advise where I can get free schematic/service manual download for the ACER AL511 lcd monitor.
I need values of resistor R29, R30, R33, R34, R35, R36, R37, R60, diodes D14 and ZD3.
Any help is highly appreciated.
Regards,
Erwin |
| 17-03-2005 | Re: Service Manual available | [quote:fac69d46ae="Guest"]Service manual is available. It will cost you 4 US$. [/quote:fac69d46ae]
Thank You... but cost international transfer money is too big.
Sylwek |
| 17-03-2005 | indesit we 12 | please help me to find a manual for indesit we 12 uk. |
| 17-03-2005 | Proba | Proba |
| 17-03-2005 | searching an lcd screen for laptop | Hi, I'm looking for an lcd screen for my laptop that is HP Pavillon Ze4357AE. The model number of the screen is:
B150XG01
Compatibles: LP150X05 (A2)
HSD150PX14
QD15XXL06
LTN150XB-L01
|
| 17-03-2005 | need a service manual for Panasonic 32" TV pc-33x78s | I need a service manual for a Panasonic 32" TV PC-33x78s. I need to find where there vertical deflection circuit is located.
Thanks. |
| 17-03-2005 | i have drivers for it | send me your email address |
| 17-03-2005 | my adress | my adress
[email protected] |
| 18-03-2005 | I search data schema for monitor compaq V75 | :cry: |
| 18-03-2005 | dark screen on my westpoint tv model no. cxw3708(14'') | This westpoint tv comes on with the onscreen displays but the tv screen stays dark, no rasters,no pictures. If you try to increase the sreen control, flyback lines appears across the screen. How do i sort this fault out? this same fault occurs in all the |
| 18-03-2005 | philips dvdr880/015 no functions just fault code AEOOED8 | Hi
Does any body know what this code means. AEOOED8 It comes up in display then there sre no functions machine locks up.
Cheers in advance. |
| 18-03-2005 | Proview 998N monitor picture oversized | Hi, I'm having a problem with an old proview 19" monitor model 998N.
The picture is bigger than the screen (oversized).
Anyone knows how to fix this problem?
Best regards, Alberto. |
| 18-03-2005 | goodmans 28" widescreen | i have this goodmans 28" widescreen chassis 11ak19b-1, i dont know the model no. does anyone? its fault is power supply churping noise and flashing red led. have replaced the line out transister, tv worked for 5 mins before shutting down again with the po |
| 18-03-2005 | JVC GR-AX750U Need mechanical breakdown | I'm looking for a copy of the mechanical breakdown for a JVC GR-AX750U camera. |
| 18-03-2005 | | is the lopt transistor s/c again check for dry joints on the driver transformer and lopt stages |
| 18-03-2005 | I needed "free" service manual EPSON DFX-8500 | [email protected] |
| 18-03-2005 | Service manual needed Philips TV L01.2E AA Chassis | Hi There,
I hope someone can make me happy ; I desperately need a servicemanual or schematic for the Philips L01.2E AA chassis.
Many thanks ! |
| 19-03-2005 | LG Studioworks 700S 17" CRT Monitor - b&w colour | Hi All,
Here is a tip for a LG Studioworks 700S 17" CRT Monitor repaired today.
Symptom: Screen lost colour - black and white only but perfect deflection.
Fault: Dry joints on IC303 on neck PCB.
Solution: Reflow solder joints on IC303.
Cheers
|
| 19-03-2005 | Need a service manual for KX w8020 Kenwood Dbl cssette deck | I have a Kenwood KX-W8020 double cassette deck which does not work. |
| 19-03-2005 | Daewoo tv keeps shutting off | My Daewoo tv worked find for a couple of years but now it shuts itself a couple of times a day at no particular time so its not the timer. I have to unplug it and plug it back in before it will start again. Its getting worse. Anybody have any ideas? |
| 19-03-2005 | Panasonic TX-26LXD1/TX-32LXD1 standby light flashing | Does anyone have available the service manual for the above LCD television (Panasonic TX-26LXD1 or TX-32LXD1)? This one seems to have developed a problem and stays stuck in standby. The only other symptom I have is that the red standby light blinks five |
| 19-03-2005 | | it sounds like dry joints but could you please give model number etc as then someone maybe able to point you in the right direction for your set |
| 19-03-2005 | Belinea 108080 | I need circuit diaram or service manual for Belinea 108080.
It has convergence error, although it has been manufactured in 2002.
Is it possible, that it has an electrical fault (rotatation of convergence
cannot be adsjusted in the service men |
| 19-03-2005 | TV Shutdown | I think that you have an electrolytic capicitor that is drying out. Look at the main filter cap. or one of the caps in the voltage regulator power supply. |
| 19-03-2005 | | Majority of the codes have no real meaning on philips units. Basically it is some sort of communication problem within the unit.
Try unplugging & leaving it off for a day or so & if you keep getting the error, it is most likely the digital pcb |
| 20-03-2005 | Need Service manual for sony DCR-DVD201 DVD camcorder | Hi I have a sony DVD201 camcorder and am in need of the service manual for it. I appreciate it very much thank you in advance |
| 20-03-2005 | | I also have KP-53S25 that was manufactured in 9/96. Recently, the picture got some horizontal bands from top to bottom even on the menu items. The TV was fine and it suddenly happened when I hooked up my MacSense USB Wireless 802.11b Network device to a |
| 20-03-2005 | | oops, forgot to put my name, Richard, for the above post. |
| 20-03-2005 | Service Manual Available of DCR-DVD201 | I have the complete service manual of DCR-DVD201 original service manual.
It includes all the three levels, schematic diagram, Part List , adjustments etc. Contact me : [email protected] |
| 20-03-2005 | ANY documentation? Owners manual, schematic, service manual | Looking for ANYTHING on the Eico model 377 signal generator. [email protected]
Thanks
Ed |
| 20-03-2005 | CMT-CP101 | I'am looking to this schematic too. I find it in the ESI data base but I can't read the file, I think it is corrupted. It was posted by "jimmy88", do you know any mean to contact him directly ?
Best regards |
| 20-03-2005 | CMT-CP101 | I'am looking to this schematic too. I find it in the ESI data base but I can't read the file, I think it is corrupted. It was posted by "jimmy88", do you know any mean to contact him directly ?
Best regards |
| 20-03-2005 | Re: ALPINE CVA1003/1004/1005/1006 | :D [quote:7d68e06fa0="nunatico"]PLEASE!! UPLOAD MANUAL FOR THESE MODELS.
THANKS IN ADVANCE!!!!
NUNATICO[/quote:7d68e06fa0] |