Date | Header | Text |
31-05-2007 | yamaha rx-v490 Reciver problem. 1st power on clicks clicks.. | I have had this reciever for a long time, worked great till about 3 months ago. Now when it is turned off or unplugged and turned back on after about 1 minute.....it clicks over and over for about an hour. I opened up the case and seen no burns or leakage |
31-05-2007 | Panasonic TC-51M02 No sound No picture | Hi,
I have the above TV which has a problem of no sound and no picture.
I ordered the schematic from Panasonic. The chassis is MX-5Z. It is the same cct as on the site here for TC-21S85RQ (MX-5 chassis).
I have purchased a couple of service manuals, |
31-05-2007 | Board Replacement for TV | I have 29 inch color TV where EHT is continuously arcing. The main board is BEKO and the picture tube is Panasonic 29 inch. This receiver is in perfect working order for a short period but EHT arching starts after short period. When this happens picture a |
31-05-2007 | buzzon audio | dunno know why it happens- but my 1990 Philips 2BS chassis, 26' ctv, does much the same thing- BUT ONLY ON VHF- the 2 stereo leds light up- BUT the VHF is not transmitting stereo!!. Anyway, I forgive the set- in my opinion, the best pic I have seen(perfec |
31-05-2007 | SONY KV32FQ70B | I NEED THE SCHEMATICS FOR THE D AND D2 BOARD.. |
31-05-2007 | Vintage boombox-help!! | I urgently need schematic or service manual for Panasonic boombox model RX 5500
Thanks in advance |
31-05-2007 | | Where is the arc ?
From the anode cap on the tube..along the eht lead..lead arcing/touching metal... Is the board burnt/carbonised...damp lead..sharp point creating arc to air..
Isolate, clean and dry arc location
Oh, by the way EHT is lethal, swit |
31-05-2007 | | Contact Pioneer service centre
Is there a name on the damaged tweeter?
If you cannot get the exact same part replace both tweeters. |
31-05-2007 | ac-dc | Hi,
first i like to mention that im NOT any good at complex electronics,
and i would like the ones that KNOW to awnser rather then me.
i only GUES.
so you need about 115 V DC? What for?
i mean "normal" in that area of voltage would b |
31-05-2007 | Symphonic VCR 8860 service manual | Hi,
I'm looking for a Symphonic VCR 8860 service manual. Can someone help?
Thanks,
esm |
31-05-2007 | | Thanks for your input. That's right, but my experience has been that it doesn't matter if it's VHF or UHF and now, satellite. I don't know about cable though.
I think it must have something to do with the signal strength, as the channel it does it in s |
31-05-2007 | panasonic video repair | Panasonic video recoreder NVHD650, with K-MECHANISM. Will load tape, and play for approx4-5 seconds then stops. Inserting a tape and then press FF or REW nothing happerns. Capstan motor looks o.k. checked tension and drive belts. Any ideas welcome.... |
31-05-2007 | plasma | hi i have a fujitsu plasma that will not go on, when i switch it on it clicks to go on green light comes on but then clicks off and red light comes back on, it just keeps going through this cycle, has any one any ideas what is wrong or can point me in the |
31-05-2007 | Volkswagen Passat Gamma Radio Failure | Evening Folks,
I've just purchased a 2001 Volkswagen Passt which is fitted with a 'Gamma' Model radio which i think is made by Blaupunkt.
When i purchased the car from an auction, everything worked apart from the radio which i assumed didnt work as |
31-05-2007 | Amplifier Thomson DPL580HT need flash dump. | I have volume on "vol52" non stop-no regulation. |
31-05-2007 | Re: plasma | [quote:d71559734d="jukebox"]hi i have a fujitsu plasma that will not go on, when i switch it on it clicks to go on green light comes on but then clicks off and red light comes back on, it just keeps going through this cycle, has any one any ideas what is |
01-06-2007 | | William I got mine fixed. I will try and walk you through the process.
I recommend having a power screw driver (not a drill driver) lots of screws, bag and tag in ziplock bags. All References are REAR VIEW of set.
1. Remove the rear cover 2. remove the |
01-06-2007 | homesafe 5100 installation manual | hi i have copy of the manual. email me if you are still interested so i can create a pdf file of it.
[email protected] |
01-06-2007 | | Only happens irregularly, only on VHF band 3, in evening- so I think whatever is is from transmitter- but then again, how do you know?.could it be neighbour down the road doing something, or power supply dipping due to increased consumer demand?- whatever |
01-06-2007 | | Direct link to PDF: //download3.medion.de/downloads/anleitungen/md5135.pdf
Greetings |
01-06-2007 | MARCONI 2019A i need service manual | I search an instruction manual for repair of signal-a generator MARCONI 2019A. Please , help !
[b:36960cc4f0][/b:36960cc4f0] |
01-06-2007 | Re: Phillips Plasma TV 42pw9982/19 | [quote:f299e8c0a2="msu"][quote:f299e8c0a2="msu"]Hello,
TV in question is Philips Plasma 42pw9982/19.
The fault is that when the TV is turned on red light comes on. It then goes to green but when we press the remote control buttons, it goes back to r |
01-06-2007 | Re: plasma | hi thanks for your reply it is a fujitsu pds4208e plasma. cheers
david |
01-06-2007 | udm3 manual | would love to purchase an original or copy of the udm3 owners manual |
01-06-2007 | | I uploaded it in the Database for you.
//www.eserviceinfo.com/download.php?fileid=29776 |
01-06-2007 | | Repairing the 61MP1 half screen problem.
I will try and walk you through the process.
I recommend having a power screw driver (not a drill driver) lots of screws, bag and tag in ziplock bags. All References are REAR VIEW of set.
1. Remove the rear c |
01-06-2007 | Kurious | Both IC,s have been replaced. TV has only 1 fuse- which is good. Anyone for some more ideas. Thanks. K. |
01-06-2007 | Sharp al series Copiadora | =)
Ola!
Tenho uma placa para reparo aqui na assistencia de uma dal al 1000 series mas eu nao faço a minima ideia de que maquina é aquela placa
preciso de uns diagramas das placas de TODAS al series pra descobrir os componentes defeituosos
|