Date | Header | Text |
03-07-2007 | | minnie, thanks for the reply and the info. Can you explain to me what you are saying though? Do I need both of those parts to fix my tv? Would you happen to know if this is something I can repair? Found out yesterday that the Mom & Pop tv repairma |
03-07-2007 | Sony CPD-G520 Monitor | Hi,
My 21" Sony "CPD-G520" CRT monitor is sick nowadays. Need doctor's advise and probably require prescription to be healthy again.
When I turn it ON, its green light lit but no picture showing on screen. Not even OSD. It's totally bla |
03-07-2007 | | The Sanyo EB6 chassis was in production around 2000-2001, so that set should be about 6 years old.
I have had exactly this problem on a such set, and all that was needed to fix it was just to adjust the VG2 (screen) control.
Anyway, it would be a goo |
03-07-2007 | tv model 20l3t | I need a schematic diagram of Panasonic TV model TC-20L3T please. |
03-07-2007 | | Do you know if the same make/model of extra USB controller card works well in other computers? Make sure that you use drivers that really are intended for your operating system and that you have the latest version of those drivers. Study the add-on card v |
03-07-2007 | | I solved the problem to some extent by changing the slots. Ie; I exchanged the slots. Now only flash drives are not detected. |
03-07-2007 | Sony CPD-G520 21" CRT monitor | Hi,
My 21" Sony "CPD-G520" CRT monitor is sick nowadays. Need doctor's advise and probably require prescription to be healthy again.
When I turn it ON, its green light lit but no picture showing on screen. Not even OSD. It's totally bla |
03-07-2007 | | Huh?..... What r u talkin about ? |
03-07-2007 | | Thanks Minnie!!!
I have ordered the relay...
This will cause the 'picture only' to go? The unit is currently back to the state in my original post... tubes out and sound only.
Matt |
03-07-2007 | | Does anyone know how to clear an L6 error from a Xerox 5028? The error says that the key counter is missing but the copier does not have a key counter and cannot be used without one... |
03-07-2007 | | [quote="Anonymous"]Hi JPBRILLOT,
yes I'm interested. If you could send me a copy of the PM5131 service manual, it would be great.
But I don't have a manual of PM5326, sorry.
Thanks in advance.[/quote]
Yes but how? I don't have your email |
03-07-2007 | | I would think the Lads & Lasses over at [url]http://www.copytechnet.com/[/url] might know the answers to the error codes |
03-07-2007 | | There is a email button in my post or you can see my email address in my profile.
Thanks |
03-07-2007 | ITT HIFI 8031 - Manal needed ! | If s.o. have this manual , please share it here ... it will be very very helpful ! |
03-07-2007 | Blaupunkt ISO connectons | Hi - Would appreciate help on the ISO connections to my Blaupunkt car radio - Model BP6340.
The radio is from a Nissan Micra - now gone - so I need to know how to wire the radio up in another car.
The layout of the radio connections is shown on the imag |
03-07-2007 | Need help | here's the situation with me. I love recording football games on a dvd disc, but for some reason, most of the DVD recorders I have tried so far don't do a very good job (on 3 hour mode). it's different with football,( I don't know if any of you have tried |
03-07-2007 | | In serious need or resetting to the defaults for this TV, if possible.
Does anyone know how to reset the service mode in order to stop my menu from rotating at 100mph vertically around the screen?
Perhaps an eeprom reset or a way to wipe it complet |
04-07-2007 | Mitsubishi Tv/VCR CV-20125 model. | Thanks so much! It worked and the child lock is finally off. I have control again with the remote. The "T" in the upper left corner is still on and I still have No sound. Any ideas? You are a genius! Thanks again for your help. :wink: |
04-07-2007 | canon zr 100 and 85 eject tape please help | I own a canon zr100 and zr85 they were both working correctly one day one of them said eject tape months later now the 85 says the same thing can u help me thank you |
04-07-2007 | canon zr 100 and 85 eject tape please help | i own a canon zr100 and a zr85 one day the 85 said eject tape so i did inserted again and same thing happened i bought a newer cam zr100 it was working fine for over 1 year now this says the same. how do i adjust tape cassette compartment thank you very |
04-07-2007 | | Hmmm. not sure of the "T" ? May infact be some sort of a problem with the unit?
Just about the only other thing is to try unplugging & plugging the set back in within a minute or so.
Have you tried contacting mitsubishi? May wanna t |
04-07-2007 | | On this set, one problem at a time. |
04-07-2007 | | Put a source in to it. |
04-07-2007 | nokia 446f monitor | Hello. Picture is too green. Adjustments does not help. What is the problem? :) |
04-07-2007 | | Thanks for your reply Minnie, but how do you mean "Put a source into it"? |
04-07-2007 | | I've plugged my Sky box into it, but that doesnt change anything. I'll try my antenna ariel this morning if that makes a difference.
Admittedly, the menu rotating is probably my fault. I did change settings in the service menu in order to try to fix th |
04-07-2007 | | After plenty of sodding about and trying to correct this. I got my meny back! Wahoo!
All that needs to be done is put my new STK392-040's in... Here's hoping. I'll keep you all posted with my progress.
They've been ordered (Hope they the right ones! |
04-07-2007 | I Need schematic TV for sanyo Model C20DN4AVN | I Need schematic TV for sanyo Model C20DN4AVN
Thanks |
04-07-2007 | | If you want to know what the problem is (incase anyone has a problem with it in the future) it was in the service menu, Mute 1, 8, 3, On.
Then in Deflection > Video Adjust1 > VSO
My setting was correct @ value 8
Not even sure what VSO stan |
04-07-2007 | | thanks for the replies.
i have done what you said and all is ok with the resistors.
i did a voltage check on ic201(tb1252bn) at pins 16,17,18 witch are the r,g,b inputs and they read 1.4v each, the outputs at pins 20,21,22 are 2 of them read 2.8v and |
04-07-2007 | | [quote:48d6f3359e="minnie"]HV splitter
#263092 ATC221 subs to #270625.[/quote:48d6f3359e]
Same part, but original subs to #270625. So that is the # you need to order. |