|08-05-2008||Thanks again Gary.
I have checked q803/4 seem ok, no shorts.
All resistors seem to be within tolerance.
I dropped the circuit board when putting the tv back together so thought i had better check for any damage. Now the time it takes to go back into st|
|08-05-2008||philips car 400 in safe||Hello,
I have a problem with my autoradio, he is in "safe" and I have not the code. :?
It is the Philips Car 400 and the number is GM0400V1631155.
Could someone help me please?
|08-05-2008||HI EVERYONE!||I'm from Mexico and I have the same problem posted up, a Diode has burn out cuz a electric discharge I'm going to do that you posted about and then I post what happend...
|08-05-2008||You missed a resistor.|
|08-05-2008||Does red move both horizontally and vertically? (left/right up/down)|
|09-05-2008||AAT3510IGV-4.63-C-B-T1 data||General Description
The AAT351x PowerManager™ products are members of AnalogicTech™'s Total Power Management IC™ product family. This family of Microprocessor Reset Circuits provides the ultimate in versatility, allowing system designers full customizati|
|09-05-2008||Help For Optical To Electrical Converter Design||The project is to detect the onset/offset of pictures on a computer monitor (CRT or LCD). Monitor starts with a totally dark background, then a 300x300 picture appears for a few hundred milliseconds then switches to darkness, then another 300x300 picture,|
|09-05-2008||When you say it is a frequency, it IS a TTL pulse that can be used as a trigger to control another device such as a micro controller.
You are already looking at the right place.
Instead of going the discrete way, why not experimenting with any of the T|
|09-05-2008||Is it possible to change a solid tantalum capacitor by anoth||Is it possible to change a solid tantalum capacitor by another of aluminum?
I have a synthesizer Ensoniq with a condenser damaged. That electrolytic is solid capacitor (condenser tantalum axial) with polarity, 22uF and 15 volts, the company AVX.
|09-05-2008||You need to change the pinning in the connector.
See this link:
If you can't see the images you need to register.|
|09-05-2008||Check out why the manufacturer has chosen to use an expensive solid tantalum capacitor in that position (maybe it is due to a high ripple current or a requirement on extremely low ESR). Compare the ESR values from AVX's datasheet for the original capacito|
|09-05-2008||If the HOT is defective or suspect, always check out why it has failed.
For example: flyback capacitor, all components in series with the horizontal deflection coils, bad solder joints in the horizontal output area, bad connections to the deflection co|
|09-05-2008||Philips Plasma||Brief description of the error: red and green cover not to barter Panel
My measuring devices:
Analog / digital voltmeter
Have a Philips 42PF5320/10 plasma panel 42v7 after the exchange problematic. The colors|
|09-05-2008||Based on the value posted, you could probably use another type with the same value & not notice any difference.--hard to tell as you can always go back & change it. I have had similar situations in the past & did not have a problem.
In my ex|
|09-05-2008||Re: Canon copier service manuals||[quote:e5c0799b09="kalp"]i have this service manual
Canon copier ir series service manuals
i have canon service manual cd's
please send e-mail me
!!!Post by spammer - Please, disregard!!![/quote:e5c0799b09]
I really need the Canon NP 6251 service m|
|09-05-2008||You don't seem to want it enough to say PLEASE
You Fucking asshole!|
|09-05-2008||Re: Citizen C27401 TV blown fuse||[quote:fdc029961d="barney"]3 years old TV, 3.15A fuse keep blowing.
I took out the HOT, #C4460 (NTE2594), tested leaky. No short circuit without the HOT.
I'll try to find the hot today and change it.
Anything else to check ?
BTW great forum !