| Date | Header | Text |
|---|
| 26-06-2008 | Jvc Tv - very low audio at maximum volume, picture ok | My Jvc Tv C21ZE is having audio problem. The Picture is very good ( normal) , & the audio when I use through the AV inputs the sound is normal, but normally the sound is very very low at maximum (last) volume, so what can be the problem |
| 26-06-2008 | | same problem here! any help would be appreciated |
| 26-06-2008 | PlayTape Machine? | Hi, I found this really cool machine called a playtape player on ebay. The guy says it is the first portable machine invented to play your own music. Is this true? Do any of you know about these things. I was thinking about bidding but I don't know. It is |
| 26-06-2008 | | http://www.justmanuals.com/samsung-tftlcd-monitor-510n-510t-710n-710t-910n-910t-parts-service-p-24928.html
$9.99 and instant download.
[email protected] |
| 26-06-2008 | | prbable painter ic failure, replace ic 7064 on small signal pcb, if you are not familiar with working with surface mount ics i would suggest taking it to someone who is, your little one pressing the tuner button is pure coincidence. |
| 26-06-2008 | Repair tip for Viewsonic N3250W or N3235W power supply | I just repaired an FSP 212-3F01 power supply in a Viewsonic N3250W. I have seen the same power supply listed for the N3235W. This one was totally dead with no 5V standby present. The problem was a shorted internal voltage regulator made up of Q7 and ZD |
| 26-06-2008 | | Hello! I found this file here "AcuLaserC1900_900_A.part1.rar" but to unpack the service manual i need part2 and maybe more as well? Please, if anyone has this please share! Thank you |
| 26-06-2008 | WANTED: Service Manual Fujifilm Finepix F31 | Hi everyone!
I've a Finepix F31d which broke last weekend. So I am looking for the Service Manual to figure out how to open it.
I would be very grateful if someone could send it to me or provide an rapidshare, or the like download.
Thank you very |
| 26-06-2008 | Samsung PLASMA Stuck In Standby - ppm42s3q | Hey Guys,
Wondering if there were any common faults with these things, I have 2 of them sat on the bench, haven't opened them up yet but both seem to be stuck in standby, the buttons on the bottom of the unit do nothing and neither does the remote.
|
| 26-06-2008 | Viewsonic n4060w dead... x3! | I've got a total of 4 viewsonic n4060w LCD TVs in a quad wall setup. 3 died in 3 weeks, 2 within 2 days of each other! The symptom is I push the power button and the power LED flashes for a half sec and goes out.
After trying all the basics like new ca |
| 26-06-2008 | No manual - but some tuning info for Matsui 14V1R | If you have a genuine remote (rather than a universal) AND it's simaler to the Matsui 14V1T which i have
Select a channel other than AV/0
Press PC*AUX, press PC*AUX and hold it for a number of seconds until the tuneing thing appears.
Press OK for t |
| 26-06-2008 | | Something that is more aimed at "collectors" and those who are intersted in history-- otherwise the whole xtrack technology while it was great in it's time (circa 1960's), it is antiquated & awkward by today's standard.
Here's some in |
| 26-06-2008 | | This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
| 26-06-2008 | | You DO realize that the original post was 3 years ago right? |
| 26-06-2008 | | :shock: |
| 26-06-2008 | Mysterious repeating dimmer failure | This is my first post here. I hope the topic is appropriate to the forum.
When I remodeled my kitchen about a year and a half ago, I installed nine line-voltage 4" recessed lights which are controlled by two Leviton Illlumatech preset dimmers, wi |
| 26-06-2008 | | I just wanted to post an update on these cables that I bought from Digikey....they are a bit shorter than I expected...they are NOT the exact length of the white ribbon cables in my chassis...luckily there is one ribbon cable that does not need to be as l |
| 26-06-2008 | | You need to check the power supply. I'm thinking this is the model you need to look for the 5vdc stand buy voltage that goes to the digital main board. |
| 26-06-2008 | | Check CS22 and CS21 (1500mfd at 16volts) in the power supply to see if the tops are mushroomed up. |
| 26-06-2008 | | * PROCEDURE:
o Clean the Spark Gaps on each CRT PWB.
o Remove the Cap, clean the contacts with thin fine sand paper then blow out excess.
o Reseal. |
| 26-06-2008 | | Replace your convergence ic's. |
| 26-06-2008 | | Bad tuner. If A/V is good, the volume thru the coax is low, suspect tuner. |
| 26-06-2008 | | I think I have heard about this fault before, is this where the 5V output is low when metered ?
I don't suppose you know the point to check, I'm fairly new to servicing PLASMAs but figured it wouldn't be all that different to the usual stuff I service |
| 26-06-2008 | | Check the plug going from the power supply to the digital main. It's like a 8 pin white plug. |
| 26-06-2008 | | Forgive me for asking but what is the digital main ?? |
| 26-06-2008 | | It would be hard to tell without more data....from what is available in today's cheap market, I'd probably call it a cheap/limited design on the part of the dimmer.
Ofcourse the sure way to tell is to examine the failed device which is not possible for |
| 26-06-2008 | | Thanks for the info. |
| 26-06-2008 | | The board under the power supply. |