| Date | Header | Text |
|---|
| 04-11-2006 | monitor acer 2300 | hi buddys, i have a acer travelmate 2300 it one day the lcd bright goes black only i see it when i put in a sun light. i take it to a guy that open it and he say that laptop dont have a back light. and if it dont have it what piece is wrong. maybe you te |
| 04-11-2006 | monitor acer 2300 | [size=18:69a4089dfb][color=blue:69a4089dfb]Help!!!! Why not monitor light.?[color=red][/color:69a4089dfb][/color][/size:69a4089dfb] |
| 04-11-2006 | re green background on sony kv32xbr96s | Thanks anyway Carcus for your help but useless for my problem,sorry to tell you that but your helpfull comments were dedicated to the previous
post for Todd Wallace ! sony xbr 5 blinking post on sun oct 29 4;12pm
hoping not to offend you knowing your |
| 04-11-2006 | BK Precision 388B Dead | I have a BK Precision 288B. I was using it to test the charging system on a car. The car was not running. I was test for a broken wire from the alternator to the battery. I suspect there must have be a charge held somewhere. Anyway, my meter just sto |
| 04-11-2006 | | I tried to edit the above topic to show my name but was not able too. So I am adding this.
Thanks for any help
Triump |
| 04-11-2006 | MAG Innovision DX700t no display..LED is lit | Got a problem with my 17" Monitor "MAG Innovision DX700t"
It has no display but has power, since I can see the power LED is lit RED, but it does not turn GREEN which would indicate that it receives signal from the videocard..
Anybody |
| 04-11-2006 | | no worries :) you have not offended me :)
it all still applied in you case because you said :-
[quote:278bf23b33]led blinks none stop for 3 minutes with sound but no picture then picture comes back on for few seconds [/quote:278bf23b33]
you will pr |
| 04-11-2006 | | and it is worth checking the resistors on the tube base PCB incase any have gone high resistance or open circuit ... also look very closely with a magnifier incase any of the high value carbon type resistors have cracks in them especialy where the G2 / Sc |
| 04-11-2006 | toyota starlet help | my starlet battery went flat so the radio locked, the code i was given did not work nor would the chassie number, now it just reads HELP.
Can someone help me I have stripped the item already.thanks regards Murray |
| 04-11-2006 | | don't worry about it i fixed it |
| 04-11-2006 | Unlock code | Need unlock code for a 1997 Audi A4 Avant TDI. The radio is the Audi Autoreverso. I have the following info:
wauzzz8dzva252688 :( |
| 04-11-2006 | sony vpl cs6 service manual or datasheet | :idea:
if any body have service manual for sony vpl cs6 please give me
email;[email protected] |
| 04-11-2006 | JVC GR-D30e | Hi,
Do you have the manual for JVC GR-D30e digital camera. If you have a copi of it, I would like to have it.
Send it to: [email protected]
Gitte |
| 04-11-2006 | | Hi,
Do you have the manual for JVC GR-D30e digital camera. If you have a copi of it, I would like to have it.
Send it to: [email protected]
Gitte |
| 04-11-2006 | sony dvd hcd-s500 please help | Hi my dvd just gave up reeding the dvd and cd put in disk it start to run nomal speed than goes slow speed does this a few cycles and than stops and say <NO DISC> i already cleaned the lense with Isopropyl lcohol no avail any help thanks in advance[ |
| 04-11-2006 | | Need password for download... :( |
| 04-11-2006 | | i have quite alot of repair notes from memory on this model but i will not be able to see them untill monday or tuesday ... i'll post again after i have looked at them ... perhaps someone else may be able to help you before then but if not i will post aga |
| 04-11-2006 | | [quote:f6de07bac6="gary"]without knowing the model number of your sony system it is impossible to give more accurate advice than that the audio outut stage has a fault, probably a s/c output ic or transistor, if output stage is ic based removed the output |
| 04-11-2006 | I need help here please | I have a Norcent DP300 DVD Player, which is malfunctioning, the screen colour turns black and white, and skips up and down, continuously. Again if anyone has any information regarding this problem as well, it would be highly appreciated. Thank you for yo |
| 04-11-2006 | SOny | May you need to use degaussing coil try first to unplug the from the household outlet wait a couple minutes plugg again , if does't work you maybe have check the digauss circuit don't have sckematic can't give more for now also see if have no motor. sp |
| 04-11-2006 | screen fault | Hi dan,
The symtoms shown looks like your plasma screen is faulty.
The connects bonding to the plasma are broken.
Cure is to change Plasma.
Not very good news.
sidney |
| 04-11-2006 | Re: SOny | [quote:61303bc4bb="Fran"]May you need to use degaussing coil try first to unplug the from the household outlet wait a couple minutes plugg again , if does't work you maybe have check the digauss circuit don't have sckematic can't give more for now also |
| 04-11-2006 | Re: Manual HP Laserjet 1012 1015 | [quote:ea463758e1="HH SAH"]i have this service manuals
please contect me
!!!Post by spammer - Please, disregard!!![/quote:ea463758e1]
would you plz send this to [email protected] too ? |
| 04-11-2006 | help | have toshiba m35-s359
when i go to push power button, the ac indicator on front just blinks yellow and nothing happens.
help |
| 04-11-2006 | sony str-de875 | Thanks, I'll try that. |
| 04-11-2006 | | Depending on the brand, they'll tell you the digital main, logic, and driver/e buffer boards. When you lose verticle like that it's normally the x or y driver or yes, a bad pdp/plasma display panel. |
| 04-11-2006 | | Are you going to post what you did? |
| 04-11-2006 | | What's the model? |
| 05-11-2006 | | There's 3 video driver IC's on the crt board. Use the tunner as ground and read the dc voltage on all three. If there all about the same, it narrows it down to the tube. Also you can try adjusting the screen voltage from the flyback to keep the set up. |
| 05-11-2006 | | While there were several issues with that unit, more than likely need to replace the laser assembly---comes complete with motors.
A6062705A
---& don't forget to remove the shorting on the new pickup. |
| 05-11-2006 | sony dvd hcd-500 | Thankyou IVTECH |
| 05-11-2006 | sony | continuos blinks :No reply from the jumgle ic. Data bus is busy and shorted to ground or held high ,IK video path is defective. don't say that's your problem. Do what Mimmi sais check those video ic's on the crt board like say you have 150v in the read 15 |
| 05-11-2006 | | [quote:145ed6a86c="JamesQB"]I had the line-output transistor S/C (or HOT transistor), type BU2508DX, cause most likely being 47uF 25V electrolytic in the line driver stage.
If you replace the parts and get it working, it'll be interesting to know if yo |
| 05-11-2006 | Sony DCR-HC 42 touch screen | My sony HC-42 is a year and half old, used very little and store in the my office draw. One day, I turn on my touch screen does not works but by remote only. Wich it mean I could not change any thing even Date. Please help.
Victor, H :arrow: |
| 05-11-2006 | RCA MM52110 Have standby light,TV clicks a few times.standby | RCA HDRPTV MM52110, took a power surge,now stndby light blinks. At power on,the set makes a CLICK..CLICK..CLICK then goes back to stndby mode. Thanks very much. |
| 05-11-2006 | looking for schematic / service manual | I hope that you may still have a service manual for a JVC 27" TV model # AV-27020. My Vertical has collapesed need help.
Thanks
Burris
[email protected] |
| 05-11-2006 | B&W Checker board | Sounds like set is stuck in service menu mode(on board pattern gen.)Try backing out of these options until given an EXIT,QUIT,Etc. Also push RESET button with a toothpick on front of set. Check your OWNERS manual for more help also. Let us know how you fi |
| 05-11-2006 | LCD Projector Service Manuals or Schematics | Hello,
I have difficulty locating URLs for free online downloading of service manuals or schematics for LCD projectors.
I would have thought major companies would have provided even a small sample of Training Manuals as a matter of good public relat |
| 05-11-2006 | | ok what so what i would do now to isolate wether its the video circuit or the crt is swap the green with say the red ..... so i would disconnect the green cathode by unsoldering the link or resistor that usualy leads to the green cathode pin on the tube b |
| 05-11-2006 | Aspect ratio wrong Help please | Hi
I am not an engineer merely a TV owner who has been screwed by the company I bought the TV from
Its a vestel 11ak45 chassis and I need to know how to reduce the width of the picture when in service mode please.
Any help would be greatly appreciated |
| 05-11-2006 | Optonica rp7100 turntable | Hi all.Has anyone got a service manual or knows of a fix for this problem. The turntable has a direct drive and on 33rpm mode the speed wanders about and sometimes judders. It's fine on 45rpm so may just be a vr fault. Can anybody help please. Thanks. |
| 05-11-2006 | help for clario | hi please i need to learn how to unlock clarion car radio for peugeot 406 old, whitch pin i must connecte in cpu to unlock? thanks |
| 05-11-2006 | Philips...I must own the only one like this on the planet. | Hello, I have a Philips 64PP9701 (RPHDTV).I have found little to no info on this set. Philips will not even acknowledge my efforts for info. This is an amazing piece of equipement. It was on the up side of $7000.00 new, it is now right at 5 years old and |