|Vizio 50" Has No Power, Fuses Good, RMI Filter Question
|The RMI filter has 115V input and only 23.5V output. Is this enough? I have tried the reset procedure, hold the power button while unplugged for 1 minute but no luck. This is kinda funny, but my cat ran out from behind the TV and it went black with no sou
|IF it is an external RMI filter - try plugging the TV into a regular wall outlet to see if it still works.
|hp deskjet 9300 printer notworking
|My hp deskjet 9300 printer is not working. the power supply (SMPS) is not switching on. plese help me out to solve the problem.
Please give me the circuit diagram of this SMPS
thanks in advance
|Looking for flash for navi Alfa Romeo 159
I am owner of AR159 with car navigation system manufactured by Magneti Marelli (no. 156068727) which unfortunately has been blocked during firmware update using CD.I have only Alfa Romeo logo on the screen, CD stuck inside navigation (alrea
|It is an internal RMI filter. I called about 10 tv repair shops in the Kansas City area yesterday. NOBODY can tell me if a RMI filter steps down voltage as well as the amperage. The ratings on the filter are 115V/6A. It says nothing on the values about t
|Well, it really depends on what section the fuse was attached to and how you want to tackle the repair.
There has been the rare case where just changing the fuse fixed the problem.
Typically all fuses are rated so that they will never will blow during
|FSP228-3F01 need R58 value.
I need to know the value of R58, located by Q2, on FSP228-3F01 power supply. It is cracked and I can't read its value. This is the last step, after following all recommendations on this thread, for my Viewsonic to work again.
Thanks for the help!
|There is no service documentation for this POS. Junk it.
|EMI/R[b:8b3644ada0]F[/b:8b3644ada0]I Filters:? Look something like these?
|Let's try that again...
|AVRM330 denon 50hz noise
|After switching on 50hz sound on all speakers at first disappearing after a few minutes.
Replace defective 6V regulator on small upside down 6v regulator board.
the original regulator 7806 is plastic lip so use isolation with standard 7806
|TV: Mitsubishi CK-3526R Help with Parts ID Doesn't power up
|I have a Mits Model CK-3526R TV. The problem I'm having is getting it to power up. It started acting up. I had to press the power button a few times before it would power upand come on. Now it won't turn on at all.
Any suggestions? I have been checking
|RCA Scenium Repair
|I have an RCA Scenium 52" HDTV DLP tv. Model Number HDLP50W151 Serial Number D513CD09F. My picture was working just fine in the morning, then in the afternoon, i turned the tv back on, and the picture was gone. I can hear the channels, I can adju
|Sony KLV-S40A10 Has Sound but No Picture
|Hey guys im trying to repair a Sony KLV-S40A10, the unit turns on you can here the audio from which channels your going through and the back light is lit but no menu and no video what so ever. What do you guys think, Ive tried the old shut it off leave it