|31-08-2008||Sylvania 6842PE wont turn on||tv wont turn on. everyone says it maybe the fuse can someone tell me what to look for and where it would be located on this tv..?|
|31-08-2008||mitsubishi vs-45609||I already have the manuals ..I will try the convergence IC's
hope this works .... I will keep you posted
|31-08-2008||LCD base||I have an EN-7100si that was used on a wall mount for several years. Over time, the base was stored in a cupboard and, of course, lost. The screen is still in perfect working condition, but I cannot use the wall mount.
Does anyone have an idea where I c|
|31-08-2008||Why don't you try the manufacturer?
|31-08-2008||fuses||[quote:2eb895df25="minnie"]Check F889, F890, and F891.[/quote:2eb895df25]
I am trying to find fuses f889,f890 and f891 and I think I may have found them but I am not sure how to replcace them. They do not look like fuses. Can you help me. Thank Yo|
|01-09-2008||Thanks Phils and minnie.
I just found what the problem is. It's a 47uF/35V filter capacitor for AN8032 (active filter control IC) Vcc. :D|
Thank you very much for the schematics of the tube receiver.
Any change of having the manual as well.
|01-09-2008||Sony Bravia 40 inch LCD wont turn ON||Hi All,
I have a Sony Bravia 40 inch LCD model KDL-S40A12U its 2 years old and yesterday it wouldnt turn on. No power is getting through and red led is not coming on ! I checked the plug fuse and the mains cable both ok !
I suspect that the problem i|
|01-09-2008||This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com
|01-09-2008||I have exactly the same problem. How can I fix my camera to work again? The screen in white and I can not switch on/off the camera.|
|01-09-2008||Akai PT4298HDX green focus problem||Green is out of focus. I tried to adjust on the focus block but I can't get a thin line using convergence adjustment pattern. The red and blue are fine though and also the convergence.|
|01-09-2008||Same Problem||Hi there,
I have Fujitsu PDS4234.
I also have the same problem of the blurry shadow ghost of the image previously presented. But I also have another problem when Im using the OSD Menu all looks fine, but when Im trying to connect S-VIDEO signal I ca|
|01-09-2008||I just found out that there was a coolant leak from green CRT. If the green focus won't adjust, will putting coolant and resealing fix the problem?|
|01-09-2008||Success!||Thanks again minnie I played around with the grids and it appears to be the best ts going to get. I made adjustments then saved them to the rom. Now my front panel convergence controls are working again. As well. And I made some adjustments there. I thin|