Date | Header | Text |
02-09-2007 | sony kv-g14p2 | Hi you expert guys,
Someone please put me out of misery... I do have this sony TV (kv-g14p2) that just don't start. It make some constant clicks around the power supply transformer.
Changed almost all parts ...
Any adivce pleeeeeeeeeeeese?
Than |
02-09-2007 | | Which model LG monitor might be in the service manual |
02-09-2007 | apple M7868 schematics | Can you send me a copy of the service manual pls? to [email protected]
Thanx alot!
Fabian |
02-09-2007 | service manual Di850 | Hello.
i m a technicion i need servic manual minolta Di850.
please send me as soon as possible
thank you |
02-09-2007 | | Is it dead? Is the convergence off? Whats wrong with it. |
02-09-2007 | Service Manual TV Panasonic TX-28SL20F | Help to find [b:c21e55e7f7]Service Manual TV [/b:c21e55e7f7][size=18:c21e55e7f7][b:c21e55e7f7]Panasonic TX-28SL20F [/b:c21e55e7f7][/size:c21e55e7f7]Chassis EURO-4H P-N TNP8EE013, please. |
02-09-2007 | Help to find Service Manual TV Panasonic TX-28SL20F | [quote:4e4a991897="Aponogeton"]Help to find [b:4e4a991897]Service Manual TV [/b:4e4a991897][size=18:4e4a991897][b:4e4a991897]Panasonic TX-28SL20F [/b:4e4a991897][/size:4e4a991897]Chassis EURO-4H P-N TNP8EE013, please.[/quote:4e4a991897] |
02-09-2007 | blaupunkt bermuda mp35 | J need a dump for this radio.Thanks a lot. |
02-09-2007 | philps | hi, I've got the same problem, but I only lost the red color. It's the cable, how can I fix it? (it has all pins ok.) thanks |
02-09-2007 | | Thanks once again Cory. I checked with Global and they want $65.00 for each IC. I see them on sale for $12 and $16 dollars on Ebay. Why does Global sell them for so much?????? |
02-09-2007 | | Because they can. If your going to buy them off of flea bay, ask the seller if their cheap Chinese knock offs and whats his warranty. Tell him you don't want crap IC's that will fail in 3 months. |
03-09-2007 | | you dont need to discharge to replace convergence ics.but make sure you check small value resistors by yoke connectos,near heatsincs for either 1 or 2 open resistors. |
03-09-2007 | | This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
03-09-2007 | dreambox dm 7020 power supply schematics | Looking for dm7020 power supply schematics. any information where to get it is very much appreciated. thanx |
03-09-2007 | Re: Service Manual plasma assistance | [quote:3f52d7396d="MarineCorpsTech"]I have 2 NEC Plasmasync 50 monitors, each have a stationary black bar somewhere on the screen. (bar that takes up half screen width by 1inch across. I hear that this is the result of bad line drivers. Does anyone have |
03-09-2007 | | Thanks for the reply. I contacted siemes for schemes, but they didn't help me because devices that I need was obsoletes.... :roll: |
03-09-2007 | | No, definitely not. The only cases where it might be good to use standby mode for consumer electronics are (1) older televisions (say, late 70's to mid 80's) using a rechargeable battery for the channel memory, some of those have so low charging current t |
03-09-2007 | | Hi,
I managed to make it starts again some time when measuring some voltages on the main power board but it still cut's as soon as the picture is dispayed (it starts, display the input name on the OSD then picture comes on briefly and the power is shu |
03-09-2007 | trafic3000 | code 8954 |
03-09-2007 | ORION G3550 | Hi, Does any one has the circuit diagram of the following TV. The problem is that there is no sound and the picture is just flyback lines(when you decrease the screen on the EHT) when you put it back to normal the PSU makes like frying noise and the TV go |
03-09-2007 | reagarding default child lock password | I have onida igo classic 20 colour T.V which has been accidentely childlocked.I have forgotten the password.Can you help me? |