|28-10-2008||my tv won't stay on. help||it's a rca t.v. and the power comes on for about 5 to 10 seconds and then the power shuts off|
|28-10-2008||Need a model #.|
|28-10-2008||I've never heard of a tv that the DVD records. Usually their play only.|
|28-10-2008||Re: not that fault||[quote:cc441fa2a7="Anonymous"]hi i tried that but not fixed it, sometimes if i keep turning tv on and of and on and off it will come on, once its on its great but if you turn it off again you have to keep hoping it will come back on and usualy it takes a |
|28-10-2008||Re: Sony KP-53S25||[quote:6032306a99="mccastlej"]I have a sony KP-53S25 that only stays in standby, and will not power up. When I plug it in, it sounds like a relay energizes, and a piece flashes. I'm not sure what that piece is, but I thought the schematic symbol looked |
|28-10-2008||Thanks for the info, my Denon has these symptoms. However, my eyes nor my son's good eyes can find r105 106. If there's anyone out there, can you give us a clue? thanks|
|28-10-2008||Re: Sony KP-53S25||[quote:6394737b34="Anonymous"][quote:6394737b34="mccastlej"]I have a sony KP-53S25 that only stays in standby, and will not power up. When I plug it in, it sounds like a relay energizes, and a piece flashes. I'm not sure what that piece is, but I though|
|28-10-2008||This isn't a new problem it has been going on since I bought it. Definitely not a permanent 12v supply issue, "saved addresses" such as "home" or "office" are fine, just "last address" (when the machine should remem|
|28-10-2008||I have the same model set, and only the bottom half of the screen displays a picture.The picture is not compressed, only halved. Its the same whether you use an antenna input or AV input.|
|29-10-2008||Looking from the top of the board, both R105, R106 are next to a CN2 connector. As it was said, use a 1 ohm, 1 watt resistor in place of them. They are underrated and simply act as a protection for plus/minus 15V lines.
|29-10-2008||daddy01, did you ever figure out where the wires attached to what i ahve the same problem|
|29-10-2008||JVC DVD XV-N322S "No file" display after reading d||To all,
Have a nice day!
My DVD player turn on when plug the AC supply without hitting power on/off key and display "no file" after read any kinds of disc then eject disc tray itself.
Anybody have flash IC dump file? with number S29AL|
|29-10-2008||Doesn't power on, just flashes power light amber to blue||It used to work fine, then took a few tried to start up, then stop working completely. The monitor turns on fine, but the status light alternates between blue and amber without any display coming up.|
|29-10-2008||Whoops, forgot to say that the monitor is a Hyundai L90D+ and the problem occurs on both the VGA and DVI inputs|
|29-10-2008||no, the battery is ok. the problem is that I cannot turn the multimeter off.|
|29-10-2008||Re: N2751W and FSP212-3F01 or FSP212-3F02||[quote:ba9afff45a="LamSV"]Hello,
Thanks to this forum, I repaired my N2751W. It broke down due to a PSU (FSP212-3F01) failure from overheating. I bought a brand new factory replacement FSP212-3F02 (about US$49) from RamPlus.Com. However, the FSP212-3F0|
|29-10-2008||[quote:8f1022cb29="kenray"]are you sure that is the correct model number?????????????[/quote:8f1022cb29]
yes i am shure.
|29-10-2008||sorry, can't find that model anyplace|
|29-10-2008||Then I'd say the on off switch is bad. You'd need the service manual to get a part # for the switch or pull the battery when not in use.|
|29-10-2008||Re: Schematics||[quote:151ae111a1="SteveW"][quote:151ae111a1="minnie"]Any good places besides here to download schematics for free?[/quote:151ae111a1]
on my server.
gebruikersnaam : schema
wachtwoord : schema
|29-10-2008||NAD 910,NAD 312 USER MANUALS||HI,
DOES ANYONE CAN HELP ME WITH THOSE MANUALS?
I BOUGHT A 2ND HAND COUPLE OF WEEKS AGO AND I DON'T KNOW HOW TO CONNECT IT IN SURROUND CONF.
|29-10-2008||And when it does work, you'll find lots of files misnamed, and there are tons of missing files. Multiple part .rar files with parts 1-3-5 but parts 2 & 4 are missing. WTF??????
Just shows to go ya, nothing worthwhile in this world is free.
|29-10-2008||Fujitsu Plasma goes directly to standby and stays there.||I have a Fujitsu 50" Plasma model PDS5001U-H. When I turn on the set I get a quick green light that immediately goes to red for standby and stays there. I can hear a click just before it switches to standby. There is no picture or words appearing on |
|29-10-2008||Re: hifi sanyo||Thanks anyway kenray|