| Date | Header | Text |
|---|
| 19-08-2008 | pls help in monitor troubleshootin | hi, need help in troubleshooting a proview 17 inch monitor, it was a dead set then i replaced a defective power mosfet & a high speed rectifier near the HOT area, now the monitor starts up but after a second the HV shutsdown leaving only the indicator |
| 19-08-2008 | Ti-86 Calculator Screen Horiz missing lines | Hello All,
I have a 10-year old TI-86 graphing calculator that is having some screen malfunctions. It's an LCD screen. There is one constant and one intermittent horizontal line of pixels that are failing to show any reaction. The malfuncioning line |
| 19-08-2008 | | I tested power supply using bulb (150 v diode and chopper transistor are taken off). The bulb burn but when I measure the voltage there is only 0,5 - 1 v across the bulb. Is my power supply OK? |
| 19-08-2008 | | Hi Minnie. Sorry, all I have is the owners manual. Would it help if I emailed you a picture of the board?
Really appreciate your assistance, few options here. |
| 19-08-2008 | fax panassonic kx-ft902 | hello people, i woking in a panasonic fax, and everytime i will make a call, the communication is broken, somebody can help me ?
Sorry About bad English..... |
| 19-08-2008 | | [quote:00b05947ef="kanamaster"]Thank you very much for your answer. The problem is that I was already visiting the manufacturer's website, and I could not find any trace of help there.
Regards.[/quote:00b05947ef]
Yup I noticed it too, you may want to sh |
| 19-08-2008 | | [quote:1795d6e645="Anonymous"]wow, I think this is the exact problem I am having. (just searched for part number:
JK07132-A and got this site)
Please explain what "IC'S " are.
And do you have that PDF?
Mine goes outa wack only sometimes, |
| 19-08-2008 | | Look on the board. JVC usually puts the pert #'s on the board. |
| 19-08-2008 | | The "panel" is what the boards are mounted to and the same thing you get your picture from. I see the average life of plasma being 3, 3 1/2 years. |
| 19-08-2008 | | This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
| 19-08-2008 | circuit board | Sorry folks but the 264102 board has the jacks on the board. The 265326 is too cheap to be the circuit board I need. The Board I need the PT# sits left of the 264102, and has the flyback mounted on it. |
| 20-08-2008 | LG du-42px12x no picture or sound just white screen | Can someone help me please? I have an LG du-42px12x plasma and all i get is a white screen with no sound. Any suggestions? And also do you know where to get an ysus board for this. Part # 6870QYH002P printed on the board or the sticker # 6871QYH051P. Than |
| 20-08-2008 | I have a marantz 61 doing the same thing | the marantz is made in by NEC so if anybody has a fix it would be nice.
all the service manual says is its a overheat issue. |
| 20-08-2008 | | This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
| 20-08-2008 | | [quote:dddc32385b="Anonymous"][quote:dddc32385b="vtech"][quote:dddc32385b="kanamaster"]Thank you very much for your answer. The problem is that I was already visiting the manufacturer's website, and I could not find any trace of help there.
Regards.[/quo |
| 20-08-2008 | Technosonic LCD1908 - dead - but stanby light flashing | Hi, I have a Technosonic LCD1908 tv which just went blank having been watching it for a couple of hours. The red stanby light pulses every 1/2 second at about half its normal brightness. I've checked the internal fuse and can't see any visual sign of comp |
| 20-08-2008 | | Thanks for reply, sorry for my delay.
It was manufactured in 2002 and has seen a fair share of use every day. |
| 20-08-2008 | Yamaha CRX-E150 | Hello,
I have a problem with this hi-fi system. When I switch on it, system in 3 second goes off. I don´t have manual. Do you anybody have adwise for me? Thank you very much.
Tomyc |
| 20-08-2008 | Re: Lg studioworks 710E model c17Jc-0 | [quote:f58a2b7b68="jone"]please i need service for Lg studioworks 710E model c17Jc-0
thank you[/quote:f58a2b7b68] |
| 20-08-2008 | | This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |