Date | Header | Text |
26-08-2007 | not as savvy of tech fix | Minnie/Cory the TV is coning on occasionaly and working fine with tutning off with remote and then it stays off for a while. based on your description is this something a novice like myself can do or do i need someone with your skills? If so what will t |
26-08-2007 | Panasonic TV not tuning in like it used to | I have a Panasonic Television (model # CT-20GG8G) that is hooked up to an antenna. It used to tune past channel 69, and several channels would come in very well. One day I made the mistake of hitting Auto Channel Program. Now it will only go up to chan |
26-08-2007 | 4-track help... | I have an old driveless digital 4-track mixer that I used to use an external zip drive with (this was back in the day). I can use external SCSI drives with it as well, but I have recently discovered that a 2.5" E-IDE notebook drive can be installed i |
26-08-2007 | | Go into the menu and switch the tuner to cable not antenna. Ant will only go to channel 69 where cable goes up to 125. |
26-08-2007 | | Didnt get to test the voltage on the rgb becouse dont know really where to test it i dont have the schematic, rgb amp chip is on the c board correct.
Well started from scracth where u first told me about turning up the screen when i did it this time a lo |
26-08-2007 | | The real fix is, seeing as the D board is no longer available, Sony calls it a phase 3 repair. You send the D board in, they jig it, fix it, and send it back. Only thing is A1300319A subs to RRA1300319A.
http://www.tritronicsinc.com/
The cheapest |
26-08-2007 | | Ok i flucked up turned up screen to high luckily voltage protection came on :oops: back to normal now . heres the dc volts for kb-94.1 kg-190.0 kr-191.4 know this is with all the bars for the screen up even sharpness and all thanks |
26-08-2007 | | Thanks for your reply. I may just be better off buying something new then. I only paid like $800 for the entire tv 3 years ago. Are you pretty positive its not a quick fix? Once again thanks for the reply. |
26-08-2007 | | Correct link: http://www.fostexusa.com/support/pdf/fostex/fd4/fd4_service_manual.pdf |
26-08-2007 | Deawoo dtq-19v1fc no power | Hi. I have a dead Deawoo tv model dtq-19v1fc chassis cn001m. I checked the fuse and it looks fine. Any ideas of what i should check next. The standby light in on (red), but wont power on. Thanks |
27-08-2007 | | Ups...nobody have this manual?
Thank´s... |
27-08-2007 | | Almost all the ones I've seen so far>>>> first unpack/unrar, then it is usually a pdf file ---provided the "RaR" is not corrupt |
27-08-2007 | Request | Hello,Can any one please mail me how to load software in the DTH/DVB card using Ali IC no 3828c and eprom IC 29LVO40A? |
27-08-2007 | part needed for SVA Plasma set | I have (2) 42" Plasma sets, model ED4206 manufactured by SVA. I have diagnosed the problems with both, have one repaired and know exactly what part I need to get the second going.
The power supply board (manufactured by Samsung) had a blown MOSFET |
27-08-2007 | | hi,
many thanks for replying.
is there a way to test the fbt.
the horizontal transistor seems to be ok on diode check of multimeter.
also please suggest a good source for sony fbt. p/n is 1-439-416-51.
regards
vishal |
27-08-2007 | Need Service Manual for SHARP VL-H9 Camcorder | Hi All,
I have a dead SHARP VL-H9 Camcorder I want to fix or mod.
Is there a service manual for this camcorder type?
I've been browsing around but no luck on me.
I think it's the very early type of its kind.
I could use any service manual for any V |
27-08-2007 | Fujitsu PDS4207 : Power supply questions / Reference | Hi,
I'm currently searching for any informations about the Fujitsu PDS 4207E-H power supply (PFW-421).
Especially, I need the connectors' pinouts and voltages of those connectors.
I'm having problems with a PDS4207 power supply which output voltag |
27-08-2007 | frankfurt | how to connect mp3 player to frankfurt stereo 6 pin din plug? |
27-08-2007 | EJECT MESSAGE ON SONY MHC-RG66 | Hi All,
:? Greatly confused and really wish somebody could help me out.
I've working on a Sony deck player for the past two days and could not traced out any fault in the system. The message "eject" will appear anytime you plugged in the cable |
27-08-2007 | SONY KV-21GS1 | i need a schematic diagram of SONY KV-21GS1 please.... |
27-08-2007 | Convert 24Dc to 24AC | Hi:
Can someone help me because i need a schematic for this converter.
I tried the standard converter 24DC/220AC and then back to 24VAC but the consumption increased more then i can have, so i need a direct converter.
Thanks |
27-08-2007 | | This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
27-08-2007 | | This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
27-08-2007 | HP 6236B Triple Variable DC Bench Lab Linear Power Supply | HP 6236B Triple Variable DC Bench Lab Linear Power Supply.
The 6236B Power Supply is a compact constant voltage/current limiting supply
combining 0 to +/- 20V tracking output rated at 0.5A with a single output rated at 0 to +6 volts at up to 2.5 A. Co |
27-08-2007 | Ford RDS4000 | Hi need an unlcok code for my ford focus
Serial No. M152741
Thanks in advance. |
27-08-2007 | Power Supply Repair B&K 1711 Variable to 50VDC-2.5A | Voltage needle jumps to maximum on power up, the output registers 93VDC and the control knobs are not responsive. The capacitors are good and the Power Transistors are OK. I'm an old guy but have minimal experience in electronic repairs and any help that |
27-08-2007 | 13,8VDC Power Supply won't support a load. | Purchased two used 13.8VDC Astron Power Supplies at the Harvard-MIT Flea Market and both are defective. The output reads 13.8 VDC , but when a load is connected, a 50 Watt auto bulb, the bulb does not light. and the voltage drops to Zero Volts. (One of |
27-08-2007 | Samsung ML-2010 | TNX a lot guys, u've helped me a lot :] |
27-08-2007 | | Are you shore that the inverter is OK ?
How you have tested the Lamps? just, and see that when whit no input you can see "NO Signal message"?
Between the mainboard and inverter it must be 4 wires
-12V or24
-GND-
-ON/OFF (5V)
- Brightn |
27-08-2007 | Question about LCD tv's / monitors | Does anyone bother with repair of LCD monitors on this forum
(haven't seen much)? I've got a few of these where I've found defective CCFL transformers, but, my experience has been - "can't
sell you that individual item, but I will sell you the whol |
27-08-2007 | LCD | Although, not familiar with that particular model, it sounds like a fault with your controller board, and not the inverter. Try any electrolytics around the processor. Also I'd check the 3.3v regulators..
Good luck,
Ralf |
27-08-2007 | Neotion | i have reciever neotionbox 100si , and it´s dead, power supply crash. were i can find schematic ?
thnaks |
27-08-2007 | | please email to [email protected]
thanks |
27-08-2007 | fbt for sony tv kvx 2941d | hi,
i am in need of fbt for sony tv kvx 2941d. sony p/n 1-439-416-51.
vishal |
27-08-2007 | philips magnavox9p6040c101 | set does not turn on, only makes burst of sound like trying to come on. If I turn it on and off long enough it will eventually come on. Then shrink big and small until it warns up to a full picture. |
27-08-2007 | "no disc" error on Sony MV-900SDS DVD Player | I have a Sony MV-900SDS in our car that recently had 2 discs(made for only 1) stuck inside. I was able to get them out without taking it apart but since then when it loads a disc it says "reading disc" and then "no disc". After readi |
27-08-2007 | AKAI AA-V205 Remote control | [quote="Def"]Hello, I have AKAI AA-V 205 and I don`t have remote control. Original remote control is RCA 905 but i don`t have, please tell me witch remote control to use for this receiver or universal remote control. I tray with some universal r |
27-08-2007 | About Prima Tv | Hi have you been able to repair your Prima Tv? What Output Transistor have you used?? |
27-08-2007 | Need Service Manual for Philips BL2.3U AA Chassis for LCD TV | I've checked the data base and could find nothing... anyone have a diagnostic/service manual for a Philips BL2.3U AA chassis. The LCD TV fails on power-up.
Thanks! |
27-08-2007 | Philips 29pt5515?/58 service menu | Hello. I have a problem with the Philips 29pt5515?/58 horizontal phase. The picture is shifted to right. To fix this problem I entered in to service menu but there is just some codes with options on/off.
I'm going to apprecciate if somone can help me. |
27-08-2007 | Philips 29pt5515/58 TV service menu problem | Hello. I have a problem with the horizontal phase of philips 29pt5515/58 tv. The picture is shifted to right. To fix this problem I entered in to service menu but there is just some codes and the only option is on or off.
I'm going to appreciate if someo |
27-08-2007 | | http://www.tritronicsinc.com
Enter the part # in the parts field. |
27-08-2007 | | Have you tried cleaning the 'eye' with isopropal alcohol? (optics) |
27-08-2007 | | Does it drop to a thin line in the center or does the picture shrink on all four sides? |