Date | Header | Text |
29-04-2010 | wiring diagram for PS3? Maybe somebody have this? | Hello I looking for wiring diagram for PlayStation3? I will be thankfull for any answers |
29-04-2010 | | I carry these manuals on my site at http://www.justmanuals.com
[email protected] |
29-04-2010 | HELP...Now what ??? | Well I replaced the y main and nothing happened. Still have sound but no picture. I am not sure if the y main is DOA or if it is the logic board. The logic board has three led lights. Two of the lights stay on and the light in the middle of the board blin |
29-04-2010 | | Do you have VS and VA at the sustain boards? |
30-04-2010 | | I have not checked that yet but will. If I do not is that an indication that SMPS is bad? |
30-04-2010 | | I am having the Compaq notebook, but due to some fault it is down in these days. Mother Board of my laptop is dead in these days and I want to purchase the mother board of EVO N1000 series Compaq mother board. If some one can give me the board of this lap |
30-04-2010 | | The same problem I am facing with my Compaq notebook. |
30-04-2010 | Board Problems | [quote:246a1a16c6="replicavertu"]The same problem I am facing with my Compaq notebook.[/quote:246a1a16c6]
yeah but still there no reply from this site... |
30-04-2010 | | Change the video card. |
30-04-2010 | | more likely a bad crt, auto grey scale circuit may be struggling to balance emmision, you could try "tweaking" the screen control but if that works it will only provide a temporary "fix" |
30-04-2010 | Re: IC: KTC5701ED | :arrow: :idea: ANYBODY KNOWS THE REPLACEMENT FOR THIS IC? THIS NUMBER IS NOT AVAILLABLE IN THE ELECTRONIC SHOP. THANKS TO ALL... >> >> >> .. well, I see.. but one guy (radioamateur) has this
IC. But the problem should be .. he ONLY |
30-04-2010 | Please help ID component in blown Power Supply | Hello,
The power supply in my printer blew out last night. It's pretty obvious from looking what component blew, but I can't ID it. It sort of looks like a capacitor, but it is mounted in a silkscreen labeled Z1. Impedance??
Posted some pictures |
30-04-2010 | | Ckecked va & vs at main power supply. va was 70v ( correct) but vs was 2.1v but should be 200v. Would this cause my problem. I tried to adjust vs on main power supply but it would not change ( strange). I tested at y sus but only got 2.1v , which so |
30-04-2010 | | if it's labeled z1 then it's probably a zener diode. can't tell you the value though. |