Date | Header | Text |
09-03-2008 | | Not sure of the exact difference between them. Probably it has more to do with features such as teletext ..ntsc/pal/secam etc.
In my experience with SONY, best to check the chasis number against the schematic as similiar models may be different.
Not |
09-03-2008 | Denon UD-M3 playback problem | Anyone help. My Denon UD-M3 is not able to play commercial music CDs. It skips, repeats a section continuously, freezes, etc. In desperation, I've tried a high-quality cleaner to no avail. Anyone with instructions/suggestions on how to replace/repair th |
09-03-2008 | | I carry the serive and part manuals for these on my site at:
http://www.justmanuals.com
[email protected] |
09-03-2008 | 2004 DVD RW Lite On LVW 5001a disc tray won't open. | Could somebody tell me how to repair this problem.....please !!! :? |
09-03-2008 | Denon D850 | Paul,
Thanks for your advice.
Apologies for the delay in reply but I had a lot of difficulty getting back on for a couple of weeks.
I suspected that this would be the case. I couldn't find anything useful on the Denon site so I think I'll go out |
09-03-2008 | 36 inch JVC audio problems AV-36850 | I bought this set new in 1998. It's been a good set until lately the sound pops and cracks when cold. After it warms up for a few minutes it's ok with an occasional buzzing sound or pop. |
09-03-2008 | Hammond Novachord | Hello,
I such a Owners Manual of the Hammond Novachord Synthesizer made in 1938-1942 :lol:
Greetings
Co
:D :) |
09-03-2008 | | Are you using a cable box? |
09-03-2008 | | Yes, but it makes the same audio on the alternate video input also |
09-03-2008 | dead AKAI LCT 2715 | My AKAI 27 inch LCD TV will not turn on and the power light just flashes red with simultaneuos popping sound from speakers but will do nothing else. any info would be appreciated[0163]0163 |
09-03-2008 | | Look at the power supply and replace all the bulged up capacitors. |
09-03-2008 | | If it's on all the inputs the only thing that they have in common is the audio IC. |
09-03-2008 | | Look on the front of the DVD player. You'll see a small pinhole. Unbend a paperclip, stick it in the hole and when you meet a little resistance, push with some force. The tray will open. Voila!
HtH
[email protected] |
10-03-2008 | | I've got 4 DVD Players sitting on the floor in my bedroom. They all work, and they all have different features. The oldest one only plays store bought DVD's the next 3 play .avi and diVx files. My current one in use is an IO data DVD player. It has a netw |
10-03-2008 | | Thanks for that. I have a squeal when turned on.
I am having trouble detecting any DC volts. There is nothing on 135v rail, as with 22v, 7v, etc?
What am I doing wrong? I am using the earth from the GND from T602 (pin 17). |
10-03-2008 | shematic amply kenwood A-7E | i need schematic amply kenwood A-7E but i didn't found on internet |
10-03-2008 | Panasonic failure | Unfortunately it may be a minor component causing the problem- these sets have extensive protection built in - it may even be a faulty or out of tolerance comp in prot circuit- if you have led on you have 5v line still- it may be vert circuit, or audio ci |
10-03-2008 | LG TV typ re-28FZ10X. | HI all ...
This morning my daughter switched on the tv , but 10 sec later she was in our sleeping room ..
The tv was dead she said ..
Indeed , i checked it and there was no picture or sound ..
When the tv is switched on there is sound for a short w |
10-03-2008 | | Found the problem. The main power supply IC601 is shorted on a couple of outputs. |
10-03-2008 | gamma iv (philips) | I bought the second hand VW passat, the radio haven't decode
can anyone help me, thankyou very much!
VWZ6Z3V1370286
9022 215 8871213
please reply to [email protected]
thankyou very much! |
10-03-2008 | | It is very common on Sanyo TVs that the screen voltage has to be adjusted from time to time to compensate for aging of the CRT.
The best way of doing this is to strictly follow the procedure in the service manual.
A simple way that might work is to |
10-03-2008 | | Make sure that there are no shorted turns or any other defects in the transformer. Of cours, there are probably no specifications available for it, but you could de-solder the transformer and measure the inductance of the primary winding, then compare tha |
10-03-2008 | nad t763 service and repair manual | need the service and frepair manual for nad t763. anybody? |
10-03-2008 | Sony Information | Lots of information on the Sony CCTV / IP range here
[url]www.sonyipnetwork.com[/url] |