Date | Header | Text |
20-05-2009 | | thank yall very much for the info. i have another component question tomorrow......trying to figure what an L stands for on the circuit board...
it is an L with a number.....anyway there were 2 components just alike and they resemble resistors but the |
20-05-2009 | | This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
20-05-2009 | | L = Coil |
20-05-2009 | | You may want to start a new thread... about coils:
http://www.uoguelph.ca/~antoon/gadgets/coils/coils.html |
20-05-2009 | Sony KP-53S17 Convergence trouble | My Sony 53" has a Covergence problem... Half the screen is out of alignment. The other half is great.... is it the stk's that need to be changed or is it something else...? Can u help me.....? |
21-05-2009 | SERVICE MODE FOR PCL5415RX/XAA | Can anybody tell me how to enter the service mode for adjusting convergence on the above mentioned Samsung TV? |
21-05-2009 | | Which half of screen? Top half - Bottom half - Left half - Right half ? |
21-05-2009 | Still not working | I changed out the flyback and the transistor has no shorts in it. Any other ideas as to what could be wrong with? |
21-05-2009 | Other ideas | cp120 220mf at 35v cp150 2200mf at 16v cp110 220mf at 200v cp114 220mf at 35v check/replace all these caps. Also resolder suspicious joints on this board. Check your fuses and DL032, DL030 for shorts. Also DL106. |
21-05-2009 | | As you face TV. It's the Left Half of the screen.... The alignment is out from left to right...... Vertical.... TY |
21-05-2009 | This reply is great. thanks for all your help | you can get the manual off the dang pioneer website
:roll: :roll:
I would like to get some real world answers, guess I'm in the wrong place. |
21-05-2009 | | If one (or more) of the convergence adjustments have little (or No) effect, Bad STKs. Also check resistors. |
21-05-2009 | | You can't get the service manual off the Pioneer site. Unless of course you have a log in to it.
[email protected] |