|27-04-2010||you may want to try cleaning and relubricating the worm gear.|
|27-04-2010||NEC 61mp1 (plasma) w/various stuck vert lines on bot 1/2 scr||I recently acquired an NEC 61MP1/61MX1A that has several vertical columns of stuck pixels (some R, some G, some B) that run from the bottom to the middle of the screen. At first I hoped it would just be an issue of the flex circuit not making connection t|
|27-04-2010||Open it up and look for "puffed electrolytic capacitors."|
|27-04-2010||You can get the user manual at www.schematics.me (use request form).|
|27-04-2010||Question for you...
I don't have the service manual you're looking for, but I have a 2405fpw that went out and that I'm trying to fix. All of the parts that I found online for this monitor don't match the part numbers in my monitor. In fact, I bought a|
|27-04-2010||If the sustain keeps popping you're probably looking at a bad panel....|
|28-04-2010||KEF PSW 2500 relay buzz and audio outout buzz||Have just repaired a similar problem with a KEF 2500 - relay was chattering at 50 Hz rate, buzz in speaker output.
Problem was caused by overheated / dried out Electrolytic filter cap (C52 - 47uF 63V) on the relay coil supply feed.
The overheating |