Date | Header | Text |
11-12-2010 | | Have somebody open them up and resolder the jacks to the circuit boards. |
11-12-2010 | | Stick a fork in it and see if it's done. |
11-12-2010 | SAMSUNG PS-42V6S LCD 3 horizontal llines on screen! | I have a problem. On my LCD screen is 3 horizontal lines. What is problem? How I can fix it?
see pic:
[img:a5e95d7ae3]http://i56.tinypic.com/2zezct4.jpg[/img:a5e95d7ae3]
[img:a5e95d7ae3]http://i55.tinypic.com/28bb4mg.jpg[/img:a5e95d7ae3] |
11-12-2010 | toshiba 50 h 72 Ch TAC 0262 | :?:
Severe green pin cusion, red andblue areOK Where do I find the adjustment? I think it is physical rather than software.
L |
12-12-2010 | | In the menu for red and blue, green is not adjustable. Bad convergence IC's. |
12-12-2010 | | Tcon or main board. It could be a bad panel too. |
12-12-2010 | | I just took out about 30 odd screws from the keyboard, to find one solder joint cracked on the power jack, in the most awkward place EVAR :evil:
I didn't have any solder so I made do with what was already on the board...
Needless to say it looks burn |
12-12-2010 | | Hey sorry minnie for such a late response, I never tried entering the service mode due to not having a remote for the unit, I tried to get the remote from my buddy but he doesnt have an original, hes using a universal. Do you think it will work using the |
12-12-2010 | | You've got a "5" button "on the set?" |
12-12-2010 | RCA lcd tv K260T2 main board replacement | Hello to all. I've just arrived here with today's problem from Africa.
I need to replace the main board (part number NUSTC_MTK 8201G_V03_MP) of a K260T2 lcd tv with a replacement board that a friend brought from China today, part number HX MST6M16JS-D V1 |
12-12-2010 | | ? exactly what jack are you talking about? You may be looking at it incorrectly. Why would you want to short out the outputs by trace design?
[img:de04e14149]http://i67.photobucket.com/albums/h287/rramani/jvcrx558.jpg[/img:de04e14149]
[img:de04e1414 |
12-12-2010 | Sony-G21 | I have a sony G21 Bg2s chasis and it is dead, check and found that STR6707n is short and r611(0.1ohms) is open and Diode D609 (D1nL20) is open and R629(33ohms) is open.If i replace this STR6707 with all the other defective components again it is getting s |
12-12-2010 | Oscilloscope Topwad 7021 repair | The oscilloscope (Topwad 7021) does work but in the beginning of the beams there is bright dots and at the beam ends the image is shrinked.Intensity regulator is turned completely back but beams are bright and turning the regulator makes week influence.T |