|26-05-2006||Sanken SPS024W-1 (UPS)||Hi all,
I need to found electric diagram of this UPS, it is connected to a phones switchboard. Thanks.
Mod. SPS024W-1 or SPS022W.|
|26-05-2006||i'd try ebay that's where i got one on CD|
|26-05-2006||denon dra 685 issues||I need a service manual for a Denon DRA 685. It is in the protection mode and nothing seems to change, no matter what parts are replaced. :roll: :P|
|26-05-2006||I bought one on ebay but it does not cover the 4709B. Only the 4709A is in the manual and there seems to be some subtle differences in the covers and removall techniques.|
|26-05-2006||Thanks for the help||OK first off it's a 27" Mitsubishi CS-27205, I wouldn't really want to go ahead and prod around but I do know someone who does this for a living and would let him fix it since I got the TV free of charge. I only wanted to provide maybe a basis for h|
|27-05-2006||service manual akai TV2817TN||Hello,
I am looking for any information of a Akai TTV model TV2817TN it doesn't give any screen , sound is oke.
If somebody have a service manual or any schema would be great.
Thanks in advance.|
|27-05-2006||JVC VM-900 Stereo Amplifier||Hello ppl, i'm looking for schematics for VM-900 .. the final block is burned and i can't read the components specs so if it happend for you to play with it a component list from memory would be usefull too.
|27-05-2006||Need Service Manual for TV JVC||Need Service Manual for TV JVC
|27-05-2006||Re: hitachi tv||[quote:c60229c4f1="post"]I have a hitachi C28W440N. on STAND BY red led tvwill not tur on either: press adigit button on remote control . programme up and down buttons on front of tv ?[/quote:c60229c4f1] :lol:|
|27-05-2006||Tevion -Aldi||Need service manual for Tevion MD30132.
|27-05-2006||Blaupunkt Fiat Ducato CD High pn 7643 318 316||Does anyone know if I can feed audio from a portable mp3 player head phone output into this radio
What pins do I connect to?
|27-05-2006||sony rm694 remote control||Does anyone know how to tune your tv using this remote ?|
|27-05-2006||Sony CDP-H3600 (CD Player)||Hi - can anyone supply me a circuit diagram (schematic) for this CD Player ?
|27-05-2006||Picture squeezes horizontally||Depends on time spent but I would say in the U.K approx £50 total or $93 with current exchange rate although I couldn't really speak for colleagues in the U.S. Capacitors are general purpose components and less than a Dollar but the i.c would be more|
|27-05-2006||kenwood kdc mp8017||help!! i had to replace the ribbon cable and took it out befor looking at it and dont know how to put the new one back in ahh anyone got a picture of how to put it in or a service manual or something|
|27-05-2006||Re: jvc service manuals for free||Dear friends,
I am in dire need for a JVC: AV 36FA 44 color tv schematic manual.
Peter. (Jamaica, NY).|
|27-05-2006||Thanks again for your help and info||Sparky thank you very much for your time and help, just a few more questions if you don't mind: I am going to try and see if the capacitors are at fault, i know they hold a lethal charge and have some knowledge on how to discharge them by using a 5-ohm r|
|27-05-2006||wk 3500 keys stick when layering||I have a wk 3500 casio, using warm pad and layering trombone, or other combo's keys will not release the sound of the key played, if you go and push on the key it will release the tone.|
|27-05-2006||Kenwood KDC 6010||Hello
Just found the site and it looks very useful. I hope someone can help. The radio referred to above is stuck on on one station and volume because all the input controls won't work and the display has disappeared. Any clues? Sorry about the previous |
|27-05-2006||Philips 28PW9513 (MD2.22AA)||Hi,
I know this is an old set but it's all I have and can't afford a new one.
I had a problem with red horizontal lines so I resoldered the joint on the J13 connector on the DSP (as instructed elsewhere on this site).
Since then the lines have be|
|27-05-2006||SERVICE MANUAL GD-V4210||Anyone know where I can get hold of a Service manual schematic for a GD-V4210|
|27-05-2006||Does it work without it??|
|27-05-2006||sony ke-32ts2e||works fine apart from a green line down the screen :roll:|
|27-05-2006||I don't have any ideas on the exact problem but it could be a resistor changing value as it heats up. It could also be a problem from startup but you can't see it until the heaters in the tube warm up. Check the resistors and joints (especially around the|
|27-05-2006||You test capacitors with an ESR meter with the set UNplugged. You never work on live equipment unless it is the last resort. There could be 30 000 Volts in there with the set unplugged.
With the set unplugged you may be able to test the electrolytics o|
|27-05-2006||One more question...||I don't understand though, if the Tv is unplugged wouldn't the capacitors be uncharged? I've left the Tv unplugged for a few days so I can let the residual charge dissipate but I hear it can stay there for days or even weeks, so I'm not really sure I und|
|27-05-2006||Dude i got the same prob can anyone plz help?|
|27-05-2006||Your meter has a battery in it. On the ohms scale, current flows from it into the capacitor the needle moves up. When the capacitor is charged with the battery voltage the current stops flowing and the needle moves back. If you swap the leads around you c|
|27-05-2006||Cold solder joints are when the solder was applied too cold. This is because the larger components take away the heat from the solder bath during manufacture. If the temperature was increased then the smaller connections would be overheated.
|27-05-2006||There may be a short on one of the supply rails. Test them all for low ohms.|
|27-05-2006||I could not really find any bad solder joints from a quick inspection (I will take the whole power supply board out later).
-Is the B+ filter capacitor the biggest one inside the TV?
-Do you think it is a problem with solder joints rather than the cap|
|28-05-2006||Basic questions about TV||I am repairing a TV for the first time and have no experience\knowledge.
-Is there really X-radiation present when I turn the TV on, should I worry about this?-I read it on a label on the CRT
-Is it dangerous to touch the metal casing of the CRT?-Isn'|