| Date | Header | Text |
|---|
| 05-08-2009 | | hi minnie
on further investigation i have just noticed theres 470 surface mount resistors on the lower buffer boards controlling voltage to each ribbon i have noticed 8 of them are reading open circuit. and where they are is where the lines are on scr |
| 05-08-2009 | HELP PLEASE | [b:49fd97e45d]HI ME IF YOU CAN HELP WITH STEREO ENCODING OF A 2002 FORD KA
ES UN VISTEON
ADD013273
YS5F-18C815-AA
THANK YOU...[/b:49fd97e45d] |
| 05-08-2009 | RB1 Navigation Repair | Hey I have a RB1 unit that the DVD/CD player has quit working.
The disk seems to rattle then I get an "unable to read disk" error.
I think there is something broke on the tray that keeps the disk stable.
Is there a place I can buy a replace |
| 05-08-2009 | Sony Plasma | Hi all, my first post here.
I have a faulty Sony Plasma TV and was wondering if it is safe to disconnect the sustain pcbs and then power it up so i can carry out V checks?
I have looked at another plasma before and unplugged the Xsus board, plugged |
| 05-08-2009 | Kenwood KR-594 | Hello All,
I have a Kenwood KR-594 receiver and the left chanel not working. I thing this receiver is gived a water. The PNP power darlinton transistor Base-Emmiter short (2SB1470). Do you have any idea what can I replace this transistor, because I can |
| 05-08-2009 | jl audio e4300 | Hello, can anyone help me,please?
I need the service manual, or better the schematics
for the car amplifier e4300 from JL Audio.
Where can i find it?
Thanx for any helpful information.
Nice Greetz, mrg |
| 05-08-2009 | | just a update minnie.
i replaced the shorted 470 surface mount resistors on the lower buffer board
and the tv just blew the new replacements minnie so not looking good. |
| 05-08-2009 | | How about following the procedures in the service manual for your specific model. |
| 05-08-2009 | | This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
| 05-08-2009 | DVD of Grondig Model gdv 95 \ z | just one above |
| 05-08-2009 | TOSHIBA 32WD98B CRT TV - HELP IN SETTING UP PLEASE | Hi
I've recently acquired the above TV but with no manual... didn't think that would be a problem but it's been a real pain setting it up :roll: . I need to hook up a VCR, Sky box & PS3. TV channels were tuned in but despite me connecting everyth |
| 05-08-2009 | | As far as i was aware there wasn't a REAL service manual for this Plasma!
Anyway, I exchanged the 4 bulging caps on this Plasma
(model = KE-42TS2/E)
4x 2200uf caps on the psu. I heard it was a common fault on these (as there are repair kits availab |
| 05-08-2009 | NEC PX-42VM3A-PDP module failure | Hello Bob,
Were you successful in aquiring the service manula for this system and might you know from where I might aquire the PDP module for an NEC PX-42VM3A?
Direct email is [email protected] |
| 05-08-2009 | | You said the first board he tuner was out, I assume it didn't blow them before? |
| 06-08-2009 | | You better use an isolation transformer when you test it under power or you may get a nice shock. |
| 06-08-2009 | | im not sure if they were blew when origanal blown board was in the set as i never checked them till today.
i replaced the blown bank of 4 470 resistors and 1 diode with good resistors and diode.
tested tv and noticed it blew all the new ones i repla |
| 06-08-2009 | | Here is the US version of the service manual KE-42TS2U:
http://www.eserviceinfo.com/downloadsm/43193/SONY_KE-42TS2U.html |
| 06-08-2009 | | most of the panels for that "budget" set are discontinued, try replacing all the electrolytic capacitors on psu pcb, personally i wouldn't bother as the picture quality and reliability on these sets is appalling. |
| 06-08-2009 | | tv is a uk set, it doesnt have a vhf tuner. |
| 06-08-2009 | | many thx anyhow for the link, checking it out now |
| 06-08-2009 | | [quote:7b9c4c9ac7="jon R"]many thx anyhow for the link, checking it out now[/quote:7b9c4c9ac7]
what a strange service manual, nothing at all mentioned re the sustain boards OR psu (switching regulator).
I have seen a few manuals in my time (although n |
| 06-08-2009 | | oops forgot to mention....... the fan isn't the problem, it has a delayed start |