|03-01-2007||SONY STR-DE875 PROTECTOR MODE||Hi,
I've a Sony STR-DE875 receiver last night the protector message show up I tried to reset unplug the power and let sit for about 15 minutes, I turn on the receiver it working for about 2 minutes then the proctector mode show up again, anyone know wh|
|03-01-2007||Nordmende 6038||Model : Nordmende 6038 F15 Chassis (chassis 01)(in fact it is the same as ICC5)
Problem : Buzzing/Hissing sound.
Replaced TDA4443 (II36) and that cured the problem only for the mono channels. It continues to happen in the stereo channels. I checked w|
|03-01-2007||Service Manual plasma assistance||I have 2 NEC Plasmasync 50 monitors, each have a stationary black bar somewhere on the screen. (bar that takes up half screen width by 1inch across. I hear that this is the result of bad line drivers. Does anyone have any troubleshooting info or service|
|03-01-2007||Re: RInex TV||I've got a inex Tv, with Locked Channels. Need to know how to unlck the channels. It's a Rinex Color Television. Remote Control Number: RC-A07. Thanks|
|03-01-2007||faulty Matsui 9601N video recorder||You could try leaving it unplugged for a while to see if it will reset. If it will not accept anymore videoplus numbers it could be the memory is full and you will have to delete some and I can hear you saying "I can't enter the menu to delete".|
|03-01-2007||Solved!||Replaced C176 and everything came back in order!!|
|03-01-2007||Emerson TV fell to the floor and has a fuzzy screen||Emerson TV fell to the floor and has a fuzzy screen what may be the problem? Is it worth fixing?|
|03-01-2007||Re: faulty Matsui 9601N video recorder||Thanks - I'll give that a try! I'm not very technically minded so appreciate the suggestion. Dave
[quote="Anonymous"]You could try leaving it unplugged for a while to see if it will reset. If it will not accept anymore videoplus numbers it co|
|03-01-2007||service manual for AIWA NSX-S70||Hi
I,m new here and search a service manual for Aiwa NSX-S70. Pleace help me.
|03-01-2007||Thx very much. Good idea. :(|
|03-01-2007||OSD has gone black!! - sony kd32dx100 television||Out of curiosity does TEXT and TEXT mix work o.k?|
search in zarekmanuals.com
I have this set and a similar problem. Just want to check it is the same.
TV normally goes into black and white mode when my son is using a PS2 plugged into AV2 at the front.
When this has happenned the normal TV picture, AV2( DVD scart connection) |
|03-01-2007||technics SA-TX30||Happy new years!
I have a Technics SA-TX30 receiver that I've owned without problems for about seven years.
A few weeks ago, it has started this weird thing of working just fine for the first 20-30 minutes, then all sound output stops. when I try to t|
|03-01-2007||Sony Vaio GRX516 parts||Looking for partslist or the partnumber of the flatcable to display.
It is broken|
|03-01-2007||Re: Mitsubishi CT-32CW1CD Cassis EW1||[quote:9494f212a2="attila2000"]Mitsubishi CT-32CW1CD Cassis EW1
DO YOU HAVE SOME SERVICE BULLETINS OR TECHNICAL TIPS FOR THIS TV?
PICTURE POOR, RESOLUTION LOW[/quote:9494f212a2]
I've got service manual, please contact me:
|03-01-2007||Vertical sync||I have a Mitsubishi VS-5007R Projection TV, and the screen rolls to the top.....It stopped after about an hour, at first, but now it takes about 4 hours to stop rolling.....any help would be greatly appreciated.....Thanks..|
|03-01-2007||Replace C2046 & C2a04 on signal board.|
|03-01-2007||Buy buy picture tube. Shadow mask is broken.|
|03-01-2007||Thank you for the quick reply|
|03-01-2007||C2046 47uf @50 V and C2A04 10uf @50v. This should stop your rolling. Let me know.|
|03-01-2007||Stand-by light on - no picture Daewoo DP 42SP||[quote:a78a26a097="Xeikon"][quote:a78a26a097="jamie"]I have got the contact detail for the daewoo service centre which is a unit set up by daewoo to sort these out. they keep the boards in stock and want £300 for the 2 boards...... i just hoped there|
|03-01-2007||[quote:81578a14a6="DANT"]Yeh, the menu comes up, but just as a black box.[/quote:81578a14a6]|
|03-01-2007||Re: Daewoo Plasma dp42 dead||[quote:3dccefa939="BigJim"]I have a plasma screen which gave up the ghost. it simply wont turn on! apparently there is common psu fault on it which spikes another board as it dies.
according to daewoo repairs it is the psu and y sustain board which fail |
|03-01-2007||There are 2 IC's STK392-150's that need to be replaced. Only one is out but replace them as a set.|
Any chance you know the approximate locations?
I can't find C2046 or C2A04 on the Signal Board...|
|04-01-2007||C2046 is near a bank of silver colored inductors and C2A04 is near the center of the signal board by a 2-pin connector AY.|
|04-01-2007||OSD has gone black!! - sony kd32dx100 television||Teletext and Teletext mix display ok?|
|04-01-2007||apex GB5108||I'm having a problem with the convergence settings for this model. Every time I turn off/on the television, the convegence is out of whack. I go to the convergence settings, and reset the red/blue lines and save them. However, when i turn the set off a|
|04-01-2007||I have the same problem, I'm going to experiment with it over the next couple days and will repost if I figure it out.|
|04-01-2007||help apple service manual||Please help i need APPLE studio display 17-inch CRT service manual, so much thanks to all of you. :D|
|04-01-2007||Help Help||Happy new year to every one here , Need help with this sony tv model # KV-27S46 , Not turning on red light blink 4 times and pause about a second blink again , Any help will be appreciated ...
Thanks in advance !!!!|
|04-01-2007||Code for vw gamma V (blaupunkt)||Can anyone please get code for gammaV VWZ1Z3W7961972
Thanks in advance.[/code]|
|04-01-2007||Broken AC Adapter Jack HELP||I have a Korg CR-4 four track recorder. Some time ago, heavy books were laid on top of my AC adapter jack while plugged into the device without my knowing. It won't power on unless I push the jack down and slightly to the left, but it is impossible to h|
|04-01-2007||service manual or cir-dia.||Hi jonnyhonda,
:( I'm looking for a service manual or cir-dia. for a AIWA AD-6400 Tape Deck
I hope you can help me. Thanks.. My Email: [email protected]|
|04-01-2007||probably the same cause but best cure is to replace ct332 with a 15pf cap.|
|04-01-2007||Fiat Brava Radio Error 1||Can anyone help me, my car radio is acting up from time to time (won't switch off, no sound). There is an ERROR 1 displayed, again only occasionally.
|04-01-2007||Re: help anyone||[quote:e69cbd698b="matlock39"]my harman avr/500 reciever is in protected mood how do i get out[/quote:e69cbd698b]
output transistor or ic (probably STK or SVI)is defective.you need to replace it|
|04-01-2007||Re: HELP stero repair||[quote:2890bb5678="tim in pa"]my first post, thanks for reading. i am repairing my bosses (i know!)vintage receiver, pioneer sx950. while tracing some crackling, i had my o-scope (x1) probe on the pre-amp output (amp input) comparing the left and right |
|04-01-2007||Re: CurtisMathes Tv struck by Lightning, any hope?||[quote:58c9cccbe9="jessefly"]I have a CurtisMathes Tv that was struck by lightning....when i plug it in the stand by light comes on. once i press power it powers on and the screen stays black for a few seconds. then it goes snowy for a split second and |
|04-01-2007||Re: Datasheet MAS1005BS||[quote:2c10d0ca62="Rolis"]Maybe someone have datasheet for IC MAS1005[/quote:2c10d0ca62]
www.digchip.com you need to register and IT IS realley free.|
|04-01-2007||Re: Denon pma-1560||[quote:48a0d1b96a="Pioneer_4_ever"]Please help me someone with a schematic / service manual for this ol Denon?!?!?! Plz[/quote:48a0d1b96a]
try to contact: [email protected]|
|04-01-2007||Re: Denon DRA-685 Protection||[quote:35133711cf="mariafer"]I have the exact same problem. The unit goes to Protection mode even without any inputs or outputs connected. I replaced several parts but nothing seems to work either. If any of you ever solve the problem, I'll thank you any |
|04-01-2007||Re: equivalent circuit BF||[quote:c045c21e67="yassino"]CAR AUDIO SONY
equivalent circuit origenal BF 389-41[/quote:c045c21e67]
|04-01-2007||Re: Simple DC circuit help, Building a simple battery charge||[quote:9fe46f5935="gauravdc"]Hello All,
I am in the 10th grade and as part of my science-class project i decided to build a mobile-mobile charger...the way this works is pretty simple actually....
I connect a couple of AA batteries together and send the|
|04-01-2007||lexmaek c752||how i can adjust the laser position,|
|04-01-2007||Dell W2606C (or W2600) Service Manual||Hi All,
I have a Dell W2606C 26" TV that has a bad power supply that I need to repair. From what I have read, there are quite a few issues with the W26XX series TV power supplies.
Does anyone have a service manual for the Dell W26XX series TVs|
|04-01-2007||service washing machine pcbs||Hi! I suggest you put your question to the forum link below as they may have a better idea.
|04-01-2007||Mitsubishi Model# VS-55601||I am looking for the service manual for Mitsubishi model number VS-55601. What I am really looking for is the part number for the mirror for this TV. I have tried servicemanual.net, user-manuals.com, smpcshop.com and ebay with no luck. Any help will be ve|
|04-01-2007||Bush WS6679 tweeting||Can anyone please help me with a Bush WS6679sil TV the green standby light just pulses and there is a tweet tweet sound I cant find what chassis it is.
If I take out the the flat plug next to the lopt which connects to the scan coils the stanby light a|
|04-01-2007||Bush WS6679sil chassis||Please can anyone tell me what the chassis number is for a Bush WS6679sil is as I believe they are Alba as well|