Date | Header | Text |
04-01-2008 | Re: [help] How to read/write a dump file | ^
^
up
Can I find help here ?!! |
04-01-2008 | Panasonic AG MX 70 AV switcher | The mixer got a power fluctuation while on use and has now no Video output(Neither composite nor component).However I do have an ouput on SVideo but without lumnance signal.
Please help and treat as urgent.
Thanking you all for your due consideration... |
04-01-2008 | Sony AE2 chassis reset to factory defaults | I have set my set to blank screen with service mode by mistake.
Does anybody know how to set the AE2 chassis to some Factory default?
Or one has a complete Listing of the settings of the chips. |
04-01-2008 | Re: Service Manual Tevion 7078Vts oder schneider9.6 | [quote:10222990e0="rebi"]Hallo.ich suche Service manual für Tevion 7078 vts.wer kann mir helfen ?[/quote:10222990e0] |
04-01-2008 | Sony TV Model KP-53S15 | I am looking for some advice. I have a Sony Videoscope rear projection TV Model KP-53S15. This was manufactured in 1995 and the picture has gotten to the point where the room has to be completely black if I want to enjoy the TV. My question is this. Is it |
04-01-2008 | | If you get the FCC ID number off the back of the monitor, I can find out who actually manufactured this monitor and I may have a service manual for it.
[email protected] |
04-01-2008 | | If you post the model number of the TV, I most likely have the service manual for it. (The Chassis number is not enough info)
[email protected] |
04-01-2008 | | Why would you post this in a Buy-Sell-Trade forum?
[email protected] |
04-01-2008 | | Sorry, it's a Sony KV-X2561D |
04-01-2008 | sony hcd-tb 10 | hallo
i have stereoset sony hcd-tb 10 WITH PROBLEM
when i put it on the display shows :protect,push power
someone have expereance with it ?? |
04-01-2008 | | Sorry, I don't have this one.
[email protected] |
04-01-2008 | | Hi mate i found that the trapiz settiing in sevice mode works liniarity on one i had hope it works for you Bob |
04-01-2008 | schematics? | Have you found one yet?
My projector turns on and show menu, but the input are not working
I called nec and they said it needs to be shipped in
$125.00 diagnostics
They estimate repair to be 300.00 - 450.00
I see on ebey they have new units for 250.0 |
04-01-2008 | | [quote:8948285f19="Justmanuals"]Why would you post this in a Buy-Sell-Trade forum?
[email protected][/quote:8948285f19]
Hey Paul, I need a service manual for my give a damn button, it's broke!
As far as your Sony, remove the screens and clea |
04-01-2008 | | minnie- the best thing for your Give a damn button is a BIG hammer :) |
05-01-2008 | | Hy.im having the same problem but the screen becomes good after waiting for some time. |
05-01-2008 | need toshiba tv repair help | need help model 32a43
serial 94738210
chassis tac0301
mfg sept 04
Original problem, volume would auto turn down to 0 interment...while 0 volume displayed could not change channel, power off- nothing until volume display would go away....
Now unit |
05-01-2008 | Samsung TXN3271HFX TV Blows 5 Amp A/C Fuse instantly | :roll: I'm having a problem with a Samsung TXN3271HFX TV Set.As soon as it's plugged in, the 5 Amp primary A/C Fuse blows.I have been told that this set has a problem with the Degaussing Thermistor shorting out, and to put a 100 watt Light across the Fuse |
05-01-2008 | | The problem might be the tact switch for volume down.Un solder the volume down switch and try powering up the set to see if it comes back up. |
05-01-2008 | Abouth Toshiba TP50G90 | Dear gentlemen:
I have a TV Toshiba model TP50G90/TP55G90 which I turned off usually with the remote control, and when I turn on 4 hours later with the control, the TV doesn't turn on and the red light indicative blink. Neither when I touch the direct |
05-01-2008 | | Replace your convergence IC's STK392-110's. |