Date | Header | Text |
19-07-2009 | | when picture disappears, if i try menu on remote no on screen display will show just a blank background, but weirdly if i turn tv to standby for a couple of seconds on remote then switch tv back on the tv will come back on and picture will be on again |
19-07-2009 | Re: Olevia tvs | [quote:d898d91889="minnie"][quote:d898d91889="vtech"][quote:d898d91889="Dan the TV man"]Olevia,LG,Samsung,and Magnavox are all Phillips products.[/quote:d898d91889]
Huh.since when?.... based on your postings so far, you sound more like Dan the [i:d898d |
19-07-2009 | | Does the power lite change? |
19-07-2009 | | no power light stops on green. |
19-07-2009 | | Have you measured the VS or VA voltage to see if it drops when the picture disappears? |
19-07-2009 | | If the lite is green, and it's NOT IN THE POWER SAVING MODE, at connector cn 68 pin 6 if the voltage is 5 volts it's not the power supply, then check connector cn 64 if pin 1 is between 50 and 70 volts pin 10 is between 75 and 90 volts it' the panel.
|
19-07-2009 | | on psu
cn 68 pin 6 voltage is 5.05v
connector cn 64 measures 61.8v
cn 64 pin 10 measures 84.5v
Self -Diagnosis mode
hr1:ok
h16:ok
h32:ok
h15:ok
h31:ok
h83:ok
--- --- --- --- |
19-07-2009 | Schematics for Luxman A321 | I have an old Luxman A321 stereo integrated amplifier which I'm disassembling for the fun of it.
I would love to have the service manual for the device, preferably without having to pay for it.
Would anyone know where I could procure it's manual or sche |
19-07-2009 | capacitor temperature | I have a samsung lcd that has 3 blown capacitors on the power supply board. This is a common issue with my model. I would really like to get this tv working again today, but the only capacitor I can find (1000uf 35v 85c) has a lower temperature rating tha |
19-07-2009 | | Repost the last post I'm getting an error. |
19-07-2009 | | Here's a thought, use the ones you have untill you get the correct ones. Don't put back 10 volts replace them with either 16 or 25 volts. I use [email protected]'s. I did 3 yesterday. It will be fine untill you replace them again. If your that consirned leave the b |
19-07-2009 | URC 24B Code for Medion | I need code for remote controller URC 24B for TV called Medion |
19-07-2009 | | http://lmgtfy.com/?q=http%3A%2F%2Fwww.satkings.org%2Fforum%2Fshowthread.php%3Fp%3D86919
Jay691975 or kianniamh |
20-07-2009 | | on psu
cn 68 pin 6 voltage measures 5.05v
connector cn 64 measures 61.8v
cn 64 pin 10 measures 84.5v
Self -Diagnosis mode
hr1:ok
h16:ok
h32:ok
h15:ok
h31:ok
h83:ok
--- --- --- ---
. |
20-07-2009 | | Depending on the amount of heat generated by the adjacent components, using 85c instead of 105c may have a shorter life span. Like minnie said, the voltage rating is much more critical and best to go higher than the original. Due to various cost factors, |