|01-02-2009||NEC plasma pixellates after 3 minutes||NEC plasma model PX-42VM3A.
It powers on and looks great for 3 minutes, then the image starts to pixellate and soon it is totally unwatchable. After it's off for an hour or so, all is OK for another 3 minutes.
Doesn't matter which input is used.
|01-02-2009||Hitachi Woofer amp Crackling and noise||Hello,
I have a Hitachi HTS5 10" 150 Watt powered subwoofer. I'm trying to isolate the problem with the amplifier.
When I turn the volume up on the amp (sub out level) it crackles followed buy intermittent blasts of noise and further crackling|
|01-02-2009||Need Schematic Whirlpooll washer AWO/D 45135||Need schematic or service manual or help with it doesn't power on Whirlpooll washer AWO/D 45135 on back side are these numbers
Thx ! :o|
|01-02-2009||Search Service Manual for Pioneer AVM-P9000R||Hello search the complet Service manual for the Pioneer AVM-P9000R or the RGB-Pinout for the Frontmonitor
|01-02-2009||thanks jts1957. looks like this is exactly what I was looking for.|
|01-02-2009||Still trying to find the correct location for these caps, I'll look through it all.|
|01-02-2009||Polaroid 1913-tdxb service manual request-Please Help||I am looking for the service manual of Polaroid 1913-tdxb LCD/DVD combo.
My tv does not power on. I have the User Manual and it is also for the 1513-TDXB so it is possible that the service manual may be for both TV's
I would aprreciate any help I ca|
|01-02-2009||problem is to send this to portugal... no one does.......................|
|01-02-2009||If you pay enough, they'll send it.|
|01-02-2009||renault megane 03 air bag light wont go of||ive just had my 03 megane engine fixed, the lad had to take the whole lump out to fix it, now its sorted he said he had to unplug the lights at the bottom of the doors because it is showing a electronic fault on the dash & the lights wouldnt go out, i|
|02-02-2009||Looking for schematic for RCA DRC8335 VCR/DVD-R Combo.||Hi, the unit is RCA branded model DRC 8335B. The board that has the problem is actually the transport control board for the VCR side, it is marked 001-05851-110(R1)
Thanks in advance!
|02-02-2009||Take it to an Authorized Renault dealer.|
|02-02-2009||50PF95 the tv is stuck in standby||hi there i have a LG 50PF95 the tv is stuck in standby
the standby light comes on and all the volume, programe up and down lights come on.
anyone help what might be the problem? is it a power supply problem with this set?
|02-02-2009||centrex air conditioner ( split system )||not a happy camper, Middle of a Sydney heatwave, and our centrex air conditioner starts playing up,,,,,, being not too worried as i still have 2 years left of the 5 year warranty i call the good guys, only to find out that the company has gone bust
|02-02-2009||Found that 15v regulator is stuffed. Suspect that 15v rail on the analogue input stage is shorted. Just need to get a couple of spare 7915 regulators to prove...|
|02-02-2009||Panasonic NV-SD300EI-U service manual needed||Hi all.
I'm searching for service manual og VCR in subject (Main PCB: VEP06982CL). C17 lost acid and corroded wires under it. I need to know value of it and where that wires go. Thanks very much|
|02-02-2009||JVC AV-32WF2EK Television||Hi
Not sure if you can point us in the right direction but my lovely 8yr old discovered the Engineering menu on the above TV and lets just say its not quite right anylonger :cry:
So is there any way of re-setting the whole thing to factory default|
|02-02-2009||I need too||Do you have it?|
|02-02-2009||Line output transformer||What line output transformer is used in the Vestel 11AK20M-6 Chassis?? The original was removed when I was asked to repair it. The TV set is Bush Model 1438.
Thanks and kind regards
That would be minus 15 volt regulator (Or 7815 for positive 15 volts).|
|02-02-2009||This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
|02-02-2009||Regulators Pin 2s are grounds, all three regulators reads 00.2ohms respect to ground point.
1) Resistance measurement of P1 ,P83 reads 0.395Mega Ohms.(Everthing connected)
2) Voltage at right side of L822 reads 14.00 volt (Except Pin1 P83)
|02-02-2009||Digital Alarm Clock Issue||I have a digital alarm clock that has a large LCD display. A while back some of the sections of the number on the clock went out. The problem persisted after changing the batteries.
The way the sections of the display go on and off has no specific pat|