Date | Header | Text |
21-08-2013 | | [quote:d3bbea31bb="jts1957"]The link previously supplied IS the SERVICE manual for unit you are working on. The closest you will likely get to a schematic for the board is on Page 19.
As with many items these days the manufacturer will support the prod |
22-08-2013 | | Hi,
The picture is not normal, you can't see the image clearly, there is color, channel and source selected work correctly and the sound is good.
If there is no signal on the TV the menu displays clearly.
You mentioned "What does turning up G |
22-08-2013 | | Adjust the Screen VR (on the FBT) clockwise a very TINY amount and see if picture &/or brightness is improved.
You say menu displays clearly with NO SIGNAL. What about with signal? When you say menu, are you talking about the customer picture adjustm |
23-08-2013 | | ("Adjust the Screen VR (on the FBT) clockwise a very TINY amount and see if picture &/or brightness is improved.") I've done that the image become white you can't see any image .
"You say menu displays clearly with NO SIGNAL. W |
23-08-2013 | | I have the same problem. In a attempt to update the firmware the sound output came back before I did the actual update: switched of the receiver, plugged the USB stick in and switched it on and selected USB input source. After a couple of seconds the re |
23-08-2013 | JVC TV AV 20NMG3B wont come on, on timer light blinking | Hi everyone,
My TV set (JVC N Series AV 20NMG3B) had a problem with the anode cap which was causing a hissing sound and an ozone smell, although after heating up the sound would stop. At around the time this started, it also started switching off uncerem |
24-08-2013 | Re: sony xo-5 | Hi Marino,
I have a Sony HO-5 with the same problem of your.
How did you do to fix it? What was the problem?
Help me please!
thanks
[quote:0817e836d9="marino"]Hi everyone,
I have problem with my stereo (SONY HO-5) The lamp of radio tune bar is on |
24-08-2013 | | So I figured out how to disassemble the UD-M3, tracked down fuse PR003, which tested as open circuit, soldered my 400ma fuse to a couple of bits of wire to replace it, then did it all again as the wires weren't long enough and the fuse fouled the CD tray |