|07-03-2007||[quote:0191be2eff="gary"]on some jvc sets service mode is entered by pressing the info key and the muting key simultaneously whilst main menu is on the screen.[/quote:0191be2eff]
That's the one, that works. Thank you very much. :D|
|07-03-2007||Samsung 225BW TFT Service Menu||Does anybody know how to access to Samsung TFT service menu?|
|07-03-2007||Re: service manual sony hcd-ep707||[quote:6805cdbe1b="bibicoco"]help, I have biogno of the service manual sony hdc-ep707 in order tarare the phase of the loader cd thanks[/quote:6805cdbe1b]|
I Have This Service Manual
If You Need !
Please E-Mail Me
Or Log On
|07-03-2007||no picture||Hey gary,
thanks for trying to help me
but the dvd player dos not got that function on thefront and also not on the remote.
Is there anything else i should look for?
|07-03-2007||no idea, only ever seen 1 pioneer dvd, sorry|
|07-03-2007||Creative Zen Micro LCD display||I can't find any information about Creative Zen Micro LCD display...
there is anybody can help me !?!|
|07-03-2007||Hi ,i went a head and changed the Vert ic. it's not the ic,.Then i started to check around and found out that it has to do with AGC or the tuner. because channel 3 VHF is good.the problem is channel 21 UHF.i have my 33vsup,i think there's a leak some wh|
|07-03-2007||Hi i went a head and changed the Vert ic,and is not the ic,.Then i started to check around and found out that it has to do with AGC or the tuner. because channel 3 VHF is good.the problem is channel 21 UHF.i have my 33vsup,i think there's a leak some whe|
|07-03-2007||I got it looking much better now, I'm Not sure how to set the DCSH, but I think it has to do with the convenange and the color bleeding....anyone know about where it should be?|
|07-03-2007||philips hi fi tray 'locked'||Try, unit to s/by then press DISPLAY button on front of unit|
|07-03-2007||hmmm wonder||Hey does anybody out there have a service manual for an xbox 360!!!! I doubt it....|
|07-03-2007||Samsung TTB1340W service mode?||Does anyone know how to enter service mode on a Samsung TT1340W Tv? I'll be sure to write the numbers down before I change anything....Thanks|
|07-03-2007||Panasonic Tv chassis Z7 stand-by led blinking...str 48051A||Can anyone help me please with this problem? Can be the STR 48051 A?|
|07-03-2007||I have a Philips model #60PP9202, Chasis #DPTV305F. I recently changed the convergence I/C's on my 60 inch projection screen HDTV. It has worked great for about 6 months, no problems at all. Here the other day when I walked in the room the screen was bl|
|07-03-2007||Philips 60PP9202 TV chirping noise when powered up||I have a Philips 60PP9202, Chasis # DPTV305F, I recently changed the convergence I/C's on my 60 inch projection screen HDTV. It has worked great for about 6 months, no problems at all. Here the other day when I walked in the room the screen was blank and |
|08-03-2007||Help please Minie.|
|08-03-2007||Searching for PDA LCD 036A-PC0919(S)WE01 manual/schematic||I can't find any information about PDA LCD display
036A-PC0919(S)WE01 ... there is anybody can help me ?!
|08-03-2007||An old german made transistor
scroll down the page
|08-03-2007||Another symptom that i noticed with this tv is that when channels are changed, it seems like the picture bounces or shutters for a few seconds before it stablizes. I'm not sure if that's a separate issue or related. The channel display shutters with the|
|08-03-2007||Found! cheap schematics for vintage radios & test equipm||I hope this post does not violate this sites rules. It should not since it has been very helpful to me. I was looking for a schematics for an old crosley radio and found this site. It was not on the list which had about everything else from that era, but |
|08-03-2007||Sony KV-32S26||R607 is open, it was not R606, also the two 2SC4834 transistors on the power supply are shorted also, removed from the board to verify. Dead shorted any way they are tested. Checked the filter caps and they are ok.
Do you see this often in this model?? L|
|08-03-2007||Akai PT 4298HDX/SMS -- dead?||No picture, no sound, just a blinking (10 in case you're counting) timer LED. I've done a ton of reading/research...any thoughts if this is convergence related? Any insite/help?|
|08-03-2007||No replacing it alone wont fix it, R607, the 2 2sc4834 and change the horizontal out put transistor. Now fix why it went out solder up the horizontal drive transformer. You see a transformer, solder it.|
|08-03-2007||[quote:f71af7c6d1="Frank"]Help please Minie.[/quote:f71af7c6d1]
On board tuner or stand up. Don't forget the RCA problem of soldering up the grounds in the tuner. On board type.|
|08-03-2007||scanner 4300c||if the motor remains active,it is good. it is the home limit sensor that may be shot or the tab that is used to indicate it is broken. disassembleand check the sensors and connectors associated.
new/used scanners are cheap and broken ones offer u a vas|
|08-03-2007||I tried mute 182 power but that didn't work.|
|08-03-2007||Hi mine did the same but what happened also was that two of the outputs on the psu were 12.6v and not 3.9v as listed not sure whether this blew anything but it would be interesting to know if the main pcb would have any voltage protection from the inputs |
|08-03-2007||tov test if convergence problem i think this model has separate pcb mounted on chassis. if so unplug red connector on left hand side of convergence pcb(power connector). now try and turn on set. if works replace 2 convergence ics(stk392-040) and check all|
|08-03-2007||SONY KP-41T15 turns on then turns off||Hi guys,
I've got a Sony KP-41T15, when the TV is turned on, I hear two relays click, then I hear the high pitch sound (similar to a CRT TV starting), then another relay clicks, and the timer/standby light flashes twice.
Anybody familiar with this p|
|08-03-2007||Sony KV-32S26||Will NTE sub parts be ok or should I get original??
I did find a site in Canada called Pacific Semiconductor that sell a kit ERK-101 for this model that contains the .10 link, the two 2sc4834's and one other transistor, I will check to see if the horizon|
|08-03-2007||IBM ThinkPad T21: CD Drive is removing itself from system||The CD-ROM drive on my ThinkPad T21 is installed as a removable device. After I boot-up and use my computer for a while, the "Safely Remove Hardware" icon is gone from the icon bar, and the drive disappears from system (i.e. I can no longer see |
|08-03-2007||DVD Recoders not finalising||Hi, need some help. 6 months ago I bought a Goodman DVD recorder deck from UK. Some times when I record, all goes well, but most of the time it does from not finalise the recorded DVD and hence cannot be played on other DVD players.
I bought a second|
|08-03-2007||Brilliant! Thank you SO much!!!
I diconnected the red lead as suggested. Now the set powers up, I get the usual audio tone associated with power on, & and get the standard video input diplayed (S-Video 1, etc).
The timer LED still blinks (7 ti|
|08-03-2007||it verifies str of the source and trans of high|
|08-03-2007||Need item from Epson Resource CD||I am looking for nvram.exe to replace a mainboard in an Epson Stylus Pro 7600. I have tried to download an image of the resource cd, but have not been able to find one. Please help|
|08-03-2007||DVD JVC xv-tha35 : display show it "locked"||Hi,
Does anybody know the solution to this problem ?
I have the same problem with my dvd player
|08-03-2007||Schematics wanted||Hi, I am looking for schematics for a JVC AX 228...'80's integrated amplifier. Also, for Toshiba Equium A60 laptop, particularly the internal PSU and on/off control section.|
|08-03-2007||Siemens FC 908 4||I have a death tv set siemens fc 908 14 inch diagonal.
I've managed to repair the power suplay but there is still something bad.
If anyone could gave to me a schematic diagram.100 x tks.
my e-mail [email protected]|
|08-03-2007||I'm sorry what do you mean?|
|08-03-2007||hi minnie, no its not a degaussing fault, the whole screen is pink, looks like the tube but that is tested ok, so it must be in the processing stage, any diagrams out there??|