Date | Header | Text |
04-10-2009 | | part #75008473 $1,175.62 remove the back remove bracket holding digital main board and power supply, remove panel put new one in reassemble. 45 minutes. 2 problems, who's honering circuit citys warranty and Average Cost: $1,056.43 so the repair exceeds th |
04-10-2009 | | [quote:7466ff77bc="jts1957"]Did you pay for it with a credit card? :wink:[/quote:7466ff77bc]
Yes...but unfortunately it was at Circuit City a year ago :?
@Justmanuals: what exactly will the parts & service manual give me? Will this tell me what |
04-10-2009 | | You wanted cheap, you got it. When price is a concern, you sacrifise quality. So when your friends say don't take the extended warranty their idiots! |
04-10-2009 | | Call for service 10 to 1 it's the panel. |
04-10-2009 | | Pull the inverters off and find out which contact is bad. It's plastic tabs that stick up with a metal strip in it the strip carbons up and shuts the set down. Sand paper of a fiber pen cleans the strip. I just did one where the contact was so bad it ate |
04-10-2009 | | I traced back to the input of the motor control IC (SIP #BA6209N) pins 5-6 and do not see a logic level voltage when using the remote. These are the input pins for the logic output directly from the microprocessor. I pulled the chip and checked for voltag |
04-10-2009 | | If you do have any document (including Credit card Rct.) that shows the date of purchase, it is a valid document for warranty purposes. Only thing is it has to be an authorized dealer and I believe Circuit City was--regardless if they are no longer around |
04-10-2009 | | If you're a tech and you know how to read a schematic and understand electronics it will. |
04-10-2009 | GoVideo Power Supply | I need the the values of the two transistors Q801 and Q802 at power supply section of GoVideo DVD+VCR model number DV1030A, please help. |
04-10-2009 | Thin black Horz. line across new Panasonic Plasma | Called for service.They had me do reset,etc. Line was still there.Panasonic set up a service call for this Wednesday.Turned set off left the house for a couple of hours.Came home turned it back on No line.The problem hasn't come back as yet and must be i |
04-10-2009 | | You don't want to have a repeat performance when the warranty runs out, better to follow the good advice others have posted...
... simply tell them the fault is intermittent.... it comes and goes as of it wants, I have seen this fault in Plasma and LCD |
04-10-2009 | | It really isn't that easy to say "Oh yeah, change that and it'll be OK", abit like giving me a ball of string and asking me the length as I won't know until I measure it.
[quote:eb23a3d46d]After several times of demagnetasation[/quote:eb23a3d |