Date | Header | Text |
25-03-2010 | | Only 4 years too late......... |
25-03-2010 | Philips CBA scaler board | No.but Ill see if I can find you one in the next week,just check back here. |
25-03-2010 | | I think its the diode in seires with the fuse, when i test the diode one way i get 0V and the other way i get .527V does that sound right? |
25-03-2010 | | Diode is good if on the diode test of DVM, you get a infinite reading hooking up leads one way, and a reading with leads reversed. May want to "float" one end of diode to be sure. :wink: |
25-03-2010 | schematics and ordering parts | Can someone please help me find a schematic for a JVC AV-32050. And offer instructions/site where can I order the part once I find it? |
25-03-2010 | | You can get the AIWA NSX-D5 service manual at www.schematics.me |
25-03-2010 | Thanks Alot | thanks for the user manual. it really helped. I wished there were more helpful techs like yourself |
25-03-2010 | I am in Canada, GTA | I fixed my N3250W with an external 24 volt power supply. I also ordered some N3856 chips and just got them this week. I can sell you one for $10 if you want to try that fix instead of replacing the supply... |
25-03-2010 | MAGNAVOX 32MF605W/17 | I TOOK MY 32 LCD APART BUT I STILL HAVING A PROBLEM GETTING TO THE POWER SUPPLY SO BEFORE I TAKE OUT ANY MORE SCREWS I WOULD LIKE THE SCHEMATICS FOR IT CAN ANY ONE HELP |
25-03-2010 | I had a similar problem | If the caps and supply are fine....check the voltage at the power on button. It should be around 3.3 volts. Goes to gnd when pressed. If the open switch voltage is way below this, check the 3.3 volt regulator on the input board...should be 3.3 volts when |