|23-02-2015||Sharp R84-ST Combi Microwave - Not Heating (microwave)||Food's not getting hot. Light Works, turntable works. Taken case off and checked the 2 internal fuses. Main 1¼" fuse is ok. 20mm, 8 Amp fuse had gone. Changed it twice, blew straight away, both times. It it the Magnetron, or is there anything el|
|23-02-2015||I presume it only blows during microwave operation?
I also presume the first fuse is the ceramic 15 - 20 amp located live side of AC line cord circuit?
Where is 20mm fuse located physically, and if you know electrically?
Unplug either primary windi|
|23-02-2015||It's on the same board as the one you mention, and blows as soon as you press the start button to use the microwave function. I'll try what you suggest.|
|23-02-2015||Did not realize I had mentioned ANY board.|
|23-02-2015||LG 50 pa5500||hello i have an LG 50pa 5500 and the problem is that at start up several times stay at logo LG and nothing else , if i unplug and plug it again 4-5-7 times the tv start up fine pass logo and working fine.
|23-02-2015||[quote:d19499bb44="guest"]again 4-5-7 times[/quote:d19499bb44]
What about '6?' :)|
|25-02-2015||sorry, you didnt, but both fuses are on a small circuit board where the incoming mains connects to.|
|25-02-2015||HELP ME||Please... I need code radio
CDR 500 (E)
|25-02-2015||Re: HELP ME||[quote:4e8ea8316e="syyaav"]Please... I need code radio
CDR 500 (E)
Duplicate post....Already answered|
|27-02-2015||Service Manual/Datasheet for 32LB650V-ZN||Hi!
Just close to New Years ewe I bought a TV from LG (32LB650V-ZN) which is supposed to be smart, but as I want to use the fully open sourced version of WebOS to begin with I have to connect to its bootloader, but so far I've failed to do so.
|28-02-2015||Need help||I know this thread is really old but I recently ran into this exact issue with my scope. My scope is the LS140 with the L1 option and it appears the hard drive has failed. I have placed a older 20gb hard drive with a 100mb partition. When I attempt to |
|28-02-2015||Cheap junk kitchen sale are SPAMMERS||We are the Classic spammers at your service.|
|28-02-2015||I figured it out. Looks like I needed to use FDISK to format the disk and label it as LEC_HDD. I also installed the dos to the hard drive but I don't believe it was necessary. I used a 20GB hard drive which was formatted to around 500 megs which is the|
|28-02-2015||Diagram for 42RV530U toshiba||I need a service manual for toshiba 42RV530U|
|28-02-2015||Tks ...||It's very good to know.
I'll try installing a different model of the original disk.
Thank you very much.|