|03-12-2013||samsung plasma PN58C550G1FXZA||Hello
I have a samsung with the pink banding issue BULLETIN NUMBER ASC20130528001
I have obtained the firmware but after checking the regular menu and the servicer menu i cannot find the pdp options menu
Go to Factory Menu Control PDP Options Log|
|03-12-2013||fuse resistor||Hi guys, .1ohm 1/2 fuse resistor measures .3ohm is this right?|
|04-12-2013||I'd say it is OK. Probably what you are measuring is the additional Lead/connector resistance of your meter that adds to the .1ohms.
While I have seen where fusistors go up in value but it would be a lot more than point ohms and it is rare.|
|04-12-2013||Samsung LE26B455C4W changing source||Samsung LE26B455C4W
After turn on the TV change input source for aproximatly the first 5 minuts.
Anyone know the issue|
|04-12-2013||[quote:fd699e5dac="vtech"]I'd say it is OK. Probably what you are measuring is the additional Lead/connector resistance of your meter that adds to the .1ohms.
While I have seen where fusistors go up in value but it would be a lot more than point ohms and|
|04-12-2013||18 Pin sockets?||Hi guys;.I used 18 pin sockets in power supply Driver ic's Mcz30001 in my kv36hs500 13 months ago and lately it has been having intermittent start up with no code in the diagnose service test,a few days ago i took out of the socket and refitted ic 8001 H|
|05-12-2013||OR .3 ohm displayed minus .2 ohm meter error gives .1 ohm of the resistor|
|05-12-2013||In regard to IC sockets in general, yes there are indeed drawbacks mainly due to tarnish that will eventually build up and can cause problems. You can always go the gold pin/ plated route to extend the time but still there is no assurance. In fact most ma|