|15-10-2010||try this manual
or this theme
|15-10-2010||well my onkyo receiver works for a while now more or les, it sure is the Q710 chip. if i press on it the sound is back when the receiver is off for some time the sound is gone but if i press on the chip again then the sound will be back when its turned on|
|15-10-2010||which wire does u mean?
|15-10-2010||VIVAX TV2122||GREETINGS EVERYONE IN SEARCH DUMP FOR THIS MODEL WITH THIS PROCESSOR TDA11126PS/N3/3.EEPROM 24C08
The problem is with Volume 1 to 99 is the same amplitude.
|15-10-2010||IC Q880 #23135089 is the most common problem a $3 try or #75003371 about $150 for the whole power supply.|
|15-10-2010||Re: Sony SL-HF900 Beta snowy picture||[quote:74ccefc9ff="cjcath"]
Have little to no experience with Beta machines.[/quote:74ccefc9ff]
Anyway, Bad head due to wear or bad pre amp.
Check signal path (even without schematics, check elko's).
Oh and befor all, a good check |
|15-10-2010||Play a dvd and see if it happens or disconnect the cable and up an antenna in it. Sounds like a cable issue to me.|
|16-10-2010||This may sound difficult but it is not; I can see your picture of the jack. There are no known standards and while your assumption may be correct, I have no way of knowing by simply looking at the tab end of the jack. It all depends on the orientation of|
I am not familiar with the specific model but more likely you have a power supply issue. Discoloration is usually related to rosin &/or glue and rarely is a sign of a problem. Without some sort of a diagram it won't be easy to look for bad comp|
|16-10-2010||Mermaid Visionary 40" screen failure||Would this be a screen or printcard failure? Picture is in super macro.
In this image it is very clear, but it does change with the picture at the screen. Seems like two lines hange together.