|[quote:64648ba325="Anonymous"][quote:64648ba325="a_kabir"][quote:64648ba325="jts1957"]Driver and output transistors are prime failure candidates.[/quote:64648ba325]
Thanks. the problem is fixed. But I don know how it back to normal as could not find ay
|It was an protection mode by pioneer, and by pressing "Avd Surr + Power" the receiver will turn on.
But mine turns on but after 2 seconds it shuts off again.
Sometimes after pressing those keys it functions normally; again it goes protect
|manual servicio hyundai
|necesito manual de servicio del tv y el modo de entrada.
el control es del link http://www.audiosanmiguel.com.ar/remotos.html#hyu
el mismo del cod 2899
soy de chile y tengo en mi taller como marca generica NEX, necesito ajustar el ancho de imagen
I know it's an old post but i have the same fault no sound on same tv and the 22" version (DSL22V1WCD).
2 sets with same fault.
Would be nice to find a cure / fix
|If the inverter was out.you would have sound,probably a bad main board or panel.
|Hi Demonstar, I would like to know if you could repair your oscilloscope, I have one vp-5220A 20MHz. It's not working properly but I hope it can help.
|AOL 32L781B no picture sound OK
|When switched on sound but no picture; all marked voltages are reading OK .No backlight,the problem was a blown SMF 4.5 amp. There are 2 fuses on the inverter board and this one was the top one
|Weird output from Acer 19" monitor, OSD works fine
|I don't really know how to describe what happened to my monitor, but I made a small video here: http://www.youtube.com/watch?v=Gjh5crE-Zx4
In summary, the output of the monitor is all garbled, but still there (not dead) - but the OSD works fine.